Other Safety Considerations; Electrical Requirements - Morphy Richards 12 CUP FILTER COFFEE MAKER - REV 1 Manual

Hide thumbs Also See for 12 CUP FILTER COFFEE MAKER - REV 1:
Table of Contents

Advertisement

47076 Rev2
18/6/08
Take care to pour hot coffee
slowly and carefully without
tipping the glass jug too fast.
Do not place the glass jug on
the hot plate unless the lid is in
position.
Do not fill above the capacity
mark of the water level gauge.
Make sure the mains lead does
not touch the hot parts of the
machine.
Do not wind the mains lead
around the hot appliance or
store the appliance until it has
fully cooled down.
Treating scalds
Run cold water over the
affected area immediately. Do
not stop to remove clothing, get
medical help quickly.
Other safety
considerations
Disconnect the coffee maker
from the mains supply when
filling, cleaning or not in use.
When unplugging, turn any
control to 'off', then remove the
plug from the wall outlet.
Keep the outside of the coffee
maker area clean and dry at all
times.
Do not touch hot surfaces.
Always use handles or knobs.
Do not immerse the coffee
maker itself in water and always
ensure the electrical
connections are kept dry.
Do not operate any appliance
with a damaged cord or plug or
after the appliance malfunctions
or has been damaged in any
manner. Ring the helpline
number for advice on
examination and repair.
The use of attachments or tools
not recommended or sold by
Morphy Richards may cause
fire, electric shock or injury.
13:58
Page 3
Do not use the coffee maker for
anything other than it's intended
purpose.
ELECTRICAL
REQUIREMENTS
Check that the voltage on the
rating plate of your appliance
corresponds with your house
electricity supply which must be
A.C. (Alternating Current).
If the socket outlets in your
home are not suitable for the
plug supplied with this
appliance, the plug should be
removed and the appropriate
one fitted.
WARNING : The plug removed
from the mains lead, if
severed, must be destroyed,
as a plug with a bared
flexible cord is hazardous if
engaged into a live socket
outlet.
Should the fuse in the 13 amp
plug require changing, a 13 amp
BS1362 fuse must be fitted.
WARNING: This appliance
must be earthed.
3 3

Advertisement

Table of Contents
loading

Table of Contents