Control Panel; Lcd Display; Features; Getting Started - Oregon Scientific WS912 User Manual

move to the next available position.
9. ROLLING MODE: Rollers work slowly upward
and downward along your spine curvatures.
10. FULL BACK: Activates fullback massage.
UPPER BACK: Activates upper back massage.
11.
12. LOWER BACK: Activates lower back massage.
13. HEAT: Turns on / off soothing heat.
14. TIMER: 15 or 20-minute timer choices.
15. INTENSITY: HI / LO massage intensity.

LCD DISPLAY

2.
5.
1. READY: Power on
SHIATSU / 3D ROLLING / ROLLING:
2.
Massage function modes
3. MINS: Timer setting and minute countdown
4. SCANNING: Indicates scanning in progress to
set lower and upper range for massage heads.
5. INTENSITY: Shows HI / LO massage intensity.

FEATURES

• 3D massage seat with heat
• Massage like therapist's hands
• 3D shiatsu and rolling massage
• Sensors adjust massage to body height
• Strength control
• 2 pairs of 3D shiatsu and 3D rolling
massage heads
• Full back, upper back, lower back and spot control
• Auto detect of body curve and height to
provide a suitable massager mode
• Heated massage heads with light indicator
• 15 or 20 minutes timer to protect the user
against over-use
• 2 level intensity control
Detachable seat cushion
•
• Two programmed massaging modes
• LCD display screen shows massager status
and timer
• Auto detect of body curve and height to
provide a suitable massager mode
• Heated massage heads with light indicator
• Easy to use remote control with LCD
display screen

GETTING STARTED

WARNING
Preparing the units for first time use -
The 3D Massage Seat with Heat comes with 2
screws located on the back of the unit to protect
the massage system during transportation. These
screws must be removed before the first use to
allow the unit function properly. Use the provided
allen key and dispose the screws appropriately.
When using the unit for the first time, you will hear
a "pop" sound. This indicates that the secure lock
for protecting the massage mechanism during
transportation is now unlocked. This only happens
when the unit is used for the first time.
CONNECTING TO MAINS
Connect the DC jack to the power adaptor.
1.
2. Connect power adaptor to mains
1.
4.
HANDLING THE REMOTE CONTROL
3.
Retrieve the remote control to operate the 3D
Massage Seat with Heat.
Always store the remote control back in its holder
after use.
Press the POWER button to turn the unit on.
READY will display on the screen.
NOTE
• Do not pull the power cord or wrap it around
the unit.
•
Do not sit on the power cord.

USING THE MASSAGER

1. Choose a massage mode when READY
displayed on the screen. The LCD screen will
illuminate and confirm your selection.
2. To turn off the massage function, simply press
the button again. On the LCD screen, READY
will blink while the massage mechanism
reverts to the original point and then it will turn
off.
NOTE
The massage mechanism always returns
to the starting position when the massage course
ends and when the unit is turned off at the control
panel. If the electrical supply is interrupted, when
the power restores, the mechanism will go back to
the original point before a new massage begins.
On the LCD screen, READY will blink while the
massage nodes are returning. The apparatus will
turn off when finished. Press POWER
begin a new massage.
3. Once the massage mode is selected, the
massage will begin.
To choose the massage mode:
SHIATSU
• Press the SHIATSU button

control panel.

• Press the INTENSITY button
your preferred massage speed (High or
low speed).
• Shiatsu can be activated concurrently with
Heat program.
ROLLING
• Press the ROLLING
control panel.
Press the WIDTH
3
again to
on the
to select
button on the
button to adjust the