Download Print this page

Using The Massagers - Oregon Scientific WS911 User Manual

All-purpose massager
Hide thumbs Also See for WS911:

Advertisement

2.
Connect the Vibration massager unit (main
unit) to power with the power cable. Connect
the Vibration massager connection jack to
Shiatsu massager's AC/DC jack.
1.
2.
3.
1.
Vibration massager
2.
Vibration massager's AC/DC jack
3.
Vibration massager's connection jack
4.
Power cable
5.
Shiatsu massager's AC/DC jack
6.
Shiatsu massager
To use the Shiatsu Massage unit and the
Vibration Massage unit separately, please
follow the below instructions:
For using Shiatsu massage unit:
Connect the AC/DC jack of the Shiatsu Massage
unit to the power cable.
For using Vibration massage unit:
Connect the AC/DC jack of the Vibration Massage
unit to the power cable.

USING THE MASSAGERS

Two in one massager:
Firstly attach the velcro strips of the one side of
the units together. Secondly, place the Shiatsu
Massage unit around your neck. Afterwards, place
the Vibration Massage unit around your lower back
and then attach the other side of the two units
together by using the velcro strips again as
illustrated below.
4.
5.
To activate the Shiatsu / Shiatsu with Heat
6.
massage program, slide the controller on the
neck massager upward or downward.
To activate the vibration / vibration with Heat
massage program, slide the controller on the
back massager upward or downward.
To turn off both massagers, slide the controller
to the middle notch respectively.
To use the Shiatsu massager alone:
Remove the Vibration massager and disconnect
all the cables from the unit. Attach power cable
as described in UNIT CONNECTIONS. Place
the massager around your neck or shoulder. Pull
straps to secure in place.
NOTE
pull or release the straps as appropriate. If you prefer,
a lighter massage, you can always use a towel in
between the unit and your skin.
To use the Vibration massager alone:
Remove the Shiatsu massager and disconnect all
the cables from the unit. Attach power cable as
described in UNIT CONNECTIONS. Fasten the
belts around your body by the Velcro strips and
adjust the massager in place.
3
To adjust the intensity of the Shiatsu massage,

Advertisement

loading