Roger Beep - Oregon Scientific TP391 User Manual

to change the voX level:
1. Press  times until the number starts flashing.
2. Press and hold
3. Press to confirm and exit the menu. Or, press
confirm and go to the next Menu Option.
lcd symBol
0
3
2
1
Once the VOX level is activated you can set a delay time, which keeps the
unit transmitting for 1 to 5 seconds after you have finished speaking (level
1 = 1 second and level 5 = 5 seconds).
to set the delay time:
1. Press  times until the number starts flashing.
2. Follow steps 2-3 above.

roGer BeeP

With Roger Beep, the receiving party hears a beep tone when a message
has been transmitted. This avoids situations where messages are interrupted
during transmission.
to disable / enable roger Beep:
Press and hold , then press
P/N:086L004722-016
or to change the VOX level.
descrIPtIon
VOX disabled
Low sensitivity – only audibly loud voices are
transmitted (useful for noisy environments)
Normal sensitivity – ideal setting for voice-activated
transmission
High sensitivity – detects and transmits all sounds
(including background noise)
to turn ON the unit.

REV.1 PAGE: 14/152
to