Call Tone; Vox Level / Voice Delay Time - Oregon Scientific TP391 User Manual

call tone

To alert other radios set to the same channel as you that you want to
communicate with them, you can transmit a call tone to pre-warn them.
to change the call tone:
1. Press 3 times until the number starts flashing.
2. Press and hold
3. Press to confirm and exit the menu. Or, press
confirm and go to the next Menu Option.
note: To page another unit, press
from your device and from the receiving party's unit at the same time.

voX level / voIce delay tIme

The Voice Activated Transmission (VOX) function allows your voice to activate
transmission automatically when the transceiver is used with an optional
hands-free microphone / headset. If the unit is set to VOX level 1, 2 or 3,
it will automatically detect and transmit your voice through to the selected
channel.The VOX level and transmission delay time should be adjusted
according to your voice loudness and personal preference.
to set up a headset:
1. Press and hold
2. Plug in the headset
3. Press and hold
note: This product is only compatible with Oregon Scientific headsets,
please ask your local retailer for further information.
P/N:086L004722-016
to change the tone.
. The selected call tone will be heard
to switch the radio off.
to switch the radio back on again.

REV.1 PAGE: 13/152
to