Dell Precision NT499 User Manual page 198

4
1 power cable
3 SATA connector
7 If you are removing a SAS drive:
Disconnect the power cable form the SAS connector.
a
Disconnect the SAS connector from the hard drive.
b
Disconnect the SAS connector from the SAS controller card.
c
8 Slide the sliding-plate lever to the right to release the shoulder screw and
slide the drive out of the lower 3.5-inch drive bay.
9 Set the drive aside in a secure location.
198
Adding and Replacing Parts
1
2
4
serial ATA cable
optional third serial ATA/SAS
hard drive
2
3