Canon imagePROGRAF PRO-510 Manual

**注意: 安裝驅動程式前請勿接駁 USB 線，以免系統發生錯誤**
** Please don't plug the USB cable until the driver asked to do so**
以下步驟及畫面僅供參考，實際操作畫面可能因裝置型號、系統或軟件版本而有所不同。
The following steps and screens are for reference only, and the actual operation screens may vary depending on
the device model, system, or software version.
下載及安裝步驟
Driver download and Installation procedure
到以下佳能網站並下載印表機的驅動程式
1.
Go to below Canon webpage and download the printer driver
https://hk.canon/en/support/imageprograf%20pro-510/model
選擇並下載以下檔案
2.
Choose and download the file below
PRO-510 MP Drivers Ver.1.xx (Windows)
按上面網頁內的［下載］ ，下載完成後開啟該檔案安裝
3.
Click [Download] in the webpage above, and then execute the file after download was completed
按［下一步］
4.
Click [Next]
在 Windows 以 USB 方式安裝及連接 imagePROGRAF PRO-510 打印機
Installing imagePROGRAF PRO-510 on Windows via USB connection
1