Table of Contents
Advertisement
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.
TEMPERATURE AND PRESSURE TREND
The temperature and pressure trend icons are based on
recent sensor readings.
RISING
ICE WARNING
If the channel 1 sensor falls between 3°C to –2°C (37°F
to 28°F),
flashes to warn you that the temperature is
approaching freezing.
NOTE The warning will automatically stop if the
temperature goes outside the ice-warning range.
HI / LO TEMPERATURE ALARM
An alert can be set to sound if the sensor set to channel 1
records above or below a temperature of your choice.
To set alarm ON / OFF:
1. Press and hold TEMP HI / LO
BAR686_M_EU_EN_RUN_R2
STEADY
FALLING
.
8
2. Use
and
to select high / low temperature alarm.
Press TEMP HI / LO
3. Press
/
to set alarm ON / OFF and press TEMP
HI / LO
to confirm.
4. If alarm has been activated, use
the temperature.
5. Press TEMP HI / LO
To silence the hi / lo temperature alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature is exceeded again.
MOON PHASE
• When calendar is set press
phase for the next/previous day.
• Press and hold
or
(2001 to 2099).
New Moon
Waxing Crescent
First Quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Last Quarter
Waning Crescent
8
2006.6.21, 11:15 AM
to confirm.
and
to select
to confirm.
or
to view the moon
to scan through the years
Hide quick links:
Advertisement
Table of Contents
