Remote Sensor (Thn132N); Getting Started; Batteries; Remote Sensor - Oregon Scientific BAR686 User Manual

REMOTE SENSOR (THN132N)

�
1. LED indicator
BAR686_M_EU_EN_RUN_R2
�
�
�
�
�
�
1. Wall mount
2. Battery
compartment
3. Battery door
4. Table stand
5. RESET
6. CHANNEL switch
4

GETTING STARTED

BATTERIES

Insert batteries before first use, matching the polarity (+
and -). Press RESET after each battery change.
indicates main unit batteries are low.
NOTE Do not use rechargeable batteries. We recommend
that you use alkaline batteries with this product for longer
usage and lithium batteries in temperatures below
freezing.

REMOTE SENSOR

The sensor collects temperature readings approx. every
40 seconds and sends them to the main unit. The main
unit can collect data from up to 3 sensors.
To set up the sensor:
1. Slide open the battery door.
4
2006.6.21, 11:15 AM