PACH & COMPANY AeGIS 7000P Series Quick Manual

Exit program, clear
field, reset keystroke.
Save program
Change master code
00
(0000 is default)
01 Add new tenant
02 Change existing tenant
03 Delete existing tenant
04 Clear all tenants
Manual unlock/lock
relay 1 with timer (01-98
05
hours, 99 hours unlock
hold, 00 hours to lock)
Manual unlock/lock
06
relay 2
Single or multi system
07
(single is default)
08 System ID number (n/a)
Change Directory digit
(2, 3 or 4 digit, 3 digit is
09
default)
Edit scrolling message
10
Relay 1 unlock interval
(04-99 seconds, 12
11
seconds is default)
12 Relay 2 unlock interval
14 Set system clock
15 Day light saving
16 Display current Date
Two ways to call from the system
3
1. Press to scroll name A-Z or
press # to call the name selected.
#
2. Press wait for dial tone then press the directory code
To unlock the door remotely
8
1) or to release relay 2 (door 2). Change using function
code 20 and 21
To unlock the door with an access code
release (screenstops scrolling) then press 4-digit access
code.
To extend talk time tenant must press
after the time out warning beep.
To call to the system: The tenant can call the visitor as
follow: Function code 74b MUST BE enabled.
Call the system's phone number and wait for "TWO BEEP",
*
then press to talk to your visitor. Press
function code 20 and 21 if the remote access number
17 Set system date
Remote unlock relay
20
1 (1-9, 9 is default)
Remote unlock relay
21
2 (1-9, 8 is default)
Set Auto-Unlock
25
Schedule (one
schedule)
Master code mask.
Warning: Master
code cannot be
40
recovered if
masked. Board
must be replaced.
46 Model and Date
Clear to factory
50
default
Dial tone enable.
51
Must be set to 0
Invalid code lock-out
72
count (1-9). 3 is
default
Enable/disable
74
incoming calls.
Enable is default
Enable/disable
75 keypad button tone.
Enable is default
Enable/disable
76 speaker tone
Enable is default
Enable/disable PBX.
77
Disable is default
View Directory by
78
Name
Talk time (10-180
79 seconds). 60 second
is default
Total number of
tenant. Tenant with
91
no name will not be
included
Some function codes are
not applicable on older
systems
6
to scroll name Z-A then
9
press to release relay 1 (door
*
press and
#
on his or her phone
9 8
or to unlock. See
• Contact 1-949-498-2951 for missing parts
• Contract 949-498-2951 for advanced replacement
•
24 Months warranty for complete system
•
6 Months warranty for Printed Circuit Board (7PCB150P or 7250P)
HOW TO ENTER A CHARACTER
1. Press the associated button to enter a character then
2. Press
3. You have 30 seconds to enter each character.
4. Letter QZ, numeric 0-9 and punctuations press
5. Press for space and
Press and release the Black Button to retrieve the current
MASTER CODE. Press #, it will take you to programming
mode.
What is The Master Code:
programming mode (0000 is default)
What is Dir (directory code):
function code 09. The number can be associated to apartment
no., first three digit of phone no., last four digit of phone no. , or
any random no. assigned to each tenants. Every tenant must
have different directory code number.
What is Access Code: 4-digit keyless code for the tenant to
unlock the door or gate.
Log on to programming mode:
Press simultaneously
then release, the welcome
message stops scrolling (repeat if
the screen still scrolling) enter 4-
digit default "MASTER CODE"
(0000), the screen will showas
below. Now the system is in
programming mode.
Select the "Function Code" from
the table
for backspace
4- digit code to log-on to
2, 3, or 4 digit number see