Advertisement
Quick Links
Advertisement
Related Manuals for Sanipex BAGNODESIGN BDM-MLI-406-A Series
Summary of Contents for Sanipex BAGNODESIGN BDM-MLI-406-A Series
- Page 1 BDM-MLI-406-A-XX M-LINE FLOOR MOUNTED BASIN MIXER www.sanipexgroup.com...
-
Page 3: Important Please Read
IMPORTANT PLEASE READ All products manufactured and supplied by AQUAECO are fit for purpose as long as they are Installed, used correctly, cleaned and receive regular maintenance in accordance with these instructions ... Remove all packaging and check the product for damage or missing parts before commencing with the installation. - Page 4 Preparation before installation Make a slot underground size must over 120 x 130 mm, depth 70-100mm including the upper brick. Spout Mixer body COLD Installation kit Fixing bolts*4 Fixing screw*4 Base plate Allen wrench*3 Concealed Box*1 Silicon oil bag*1 Drill installation holes in the Connect the concealed valve with bottom (Ø8mm×4), then install plumbing, open the valve and get...
- Page 5 Decorating with upper bricks. Put in the concealed box and fasten it with M4 screws, ensure it is in horizontal measuring by the level. Make sure the bubble is in the middle position of lever to ensure the valve installed in horizontal. Take off the upper cover, loosen Cut the plastic socket to ensure it the fixing bolts M5*4.
- Page 6 Install the upper Apply some silicon mixer body kit with oil onto the bottom the valve beneath, of the spout, install and fasten it the the spout with the base plate with mixer body, fasten fixing bolts O-ring. the spout. Put the base plate through Apply the middle hole of...
- Page 7 Note:...
- Page 8 www.sanipexgroup.com INM-MLI-406-A-XX-11-24...
Need help?
Do you have a question about the BAGNODESIGN BDM-MLI-406-A Series and is the answer not in the manual?
Questions and answers