Advertisement
Quick Links
Roxie QD
Dedicated L-bracket for Nikon
Z5, Z6, Z7, Z6 II, and Z7 II
Instruction Manual
IMPORTANT
DO NOT USE YOUR L-BRACKET UNTIL YOU HAVE READ THESE
INSTRUCTIONS. NO WARRANTY CLAIM WILL BE ENTERED INTO FOR
THE MISUSE OR INCORRECT USE OF THESE PRODUCTS.
Look at your box.
See that little sticker with a serial number and a barcode? Peel it off and
put it here for safe keeping.
Or don't.
Advertisement
Related Manuals for 3 Legged thing Roxie QD
Summary of Contents for 3 Legged thing Roxie QD
- Page 1 Roxie QD Dedicated L-bracket for Nikon Z5, Z6, Z7, Z6 II, and Z7 II Instruction Manual IMPORTANT DO NOT USE YOUR L-BRACKET UNTIL YOU HAVE READ THESE INSTRUCTIONS. NO WARRANTY CLAIM WILL BE ENTERED INTO FOR THE MISUSE OR INCORRECT USE OF THESE PRODUCTS.
- Page 2 1/4”-20 screw through the PD plate (2) and line-up the small pin hole with the 1/4”-20 thread (3). The PD plate will simply slot into place and then you can tighten this onto your camera (4). Pictures for illustration only as L-Bracket differs from Roxie QD.
- Page 3 QR code. Use this serial number to register your products at www.3leggedthing.com/register Details of your warranty can be found at www.3leggedthing.com/faq Your warranty covers 3 Legged Thing products only. If you have a question or suspect you have a fault, contact us first at www.3leggedthing.com/support...
Need help?
Do you have a question about the Roxie QD and is the answer not in the manual?
Questions and answers