Advertisement
Quick Links
Advertisement
Related Manuals for 3 Legged thing PUNKS PATTI 2.0
Summary of Contents for 3 Legged thing PUNKS PATTI 2.0
- Page 1 PATTI 2.0 Instruction Manual BUIL T TO ENABLE. CREA TED TO INSPIRE...
- Page 2 Look at your box. See that little sticker with a serial number and a barcode? Peel it off and put it here for safe keeping. Or don’t. IMPORTANT DO NOT USE YOUR L-BRACKET UNTIL YOU HAVE READ THESE INSTRUCTIONS. NO WARRANTY CLAIM WILL BE ENTERED INTO FOR THE MISUSE OR INCORRECT USE OF THESE PRODUCTS.
- Page 3 Anatomy of Patti 2.0 AirHed Mini Tri-Mount Plate Center Column Column Lock 1/4”-20 accessory mounting thread Leg Catch Hinge Detachable Leg D-Ring Flip Lock Boots/footwear Toolz OPTIMUM LEG ANGLES: We offer the three leg angles that we consider to be optimum for using a tripod.
- Page 4 NEVER undo any of the knobs without holding your camera. IMPORTANT All 3 Legged Thing Punks 2.0 Tripod Kits include a quick release plate along with the AirHed. Before using the tripod, please check your release plate. It is important that you tighten your release plate onto the clamp completely and check, before use. We recommend placing the orange knob UNDER the lens, where it cannot be accidentally released.
-
Page 5: Basic Functionality
Basic Functionality The Tri-Mount Plate comes with three hollow ends (a), for connecting your strap, carabiner, or other compatible devices. The central bolt can be removed and reversed, as it has both 1/4” and 3/8” threads (b). In the base of the centre column is a D-Ring (c), which is used to connect either your strap, for carrying, or the bag for ballast, using the carabiner (d). - Page 6 Legs, catches & locks In order to change the leg angle or to stow away your tripod you will need to pull down on the leg catch (a) maneuver the leg into the desired position and then release the catch. To open and extend the tripod legs simply flip open the flip lock (b) allowing you to select a desired height.
- Page 7 How to pack your tripod away To pack your tripod away to its smallest pack down size, make sure all the legs are completely retracted and the column sections (where applicable) are in the ‘ s tandard’ position. You then need to make sure the Tri-Mount plates curved edge is in-line with the legs while the column is up.
- Page 8 QR code. Use this serial number to register your products at www.3leggedthing.com/register Details of your warranty can be found at www.3leggedthing.com/faq Your warranty covers 3 Legged Thing products only. If you have a question or suspect you have a fault, contact us first at www.3leggedthing.com/support...
Need help?
Do you have a question about the PUNKS PATTI 2.0 and is the answer not in the manual?
Questions and answers