Page 1
Manual wet / dry 4 gal 6 gal Capacity Applies for: Code Model 102963 ASP-04N 102964 ASP-06N ASP-04N ASP-06N Read this manual thoroughly CAUTION before using the tool.
Assembly Keep this manual for future references. Start Up The illustrations in this manual are for reference Maintenance only. They might be different from the real tool. Troubleshooting Notes Authorized service centers Warranty policy ASP-04N ASP-06N ENGLISH...
Avoid the risk of electric shock or severe injury. When the power cable gets damaged it should only be replaced by the manufacturer or at a TRUPER Authorized Service Center. The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use.
Service Repair the tool in a TRUPER Authorized Service Center using Prevent unintentional starting up. Ensure the switch is in the only identical spare parts. “OFF” position before connecting into the power source and / This will ensure that the safety of the power tool is maintained.
• If the vacuum is not working properly: missing parts, dropped or damaged, left outdoors or dropped in water, take it to a TRUPER Authorized Service Center. Power Cable • Turn off the vacuum cleaner before unplugging it.
Assembly • Push the latches (A) inward to lift the motor cover (B). • Remove all accessories from inside the container. • The HEPA filter (C) is factory installed, remember to use the vacuum cleaner with one of the filters installed otherwise the motor will be damaged and the warranty will be void.
Start up HEPA filter • The HEPA filter is designed to filter dry and wet particles. • Open the vacuum cleaner as indicated on page 7 to verify that the HEPA filter is properly installed. • Otherwise place the filter in the filter cage (A) as shown. Then put the engine cover back in place.
Out of specification carbons may damage the motor. • Tools should only be serviced at a TRUPER Authorized • When changing carbons, always replace both carbons. Service Center. Service and maintenance by unqualified persons can be dangerous and may result in personal injury and void the product warranty.
In the event of any problem contacting a TRUPER Authorized Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center.
It includes the costs of transportation of the product that derive from its fulfillment of its service network. . Phone number 800-018-7873. Manufactured by TRUPER, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Phone number 761 782 9100 Made in Mexico.
Need help?
Do you have a question about the ASP-04N and is the answer not in the manual?
Questions and answers