Related Manuals for Truper ASD-120
Summary of Contents for Truper ASD-120
- Page 1 Manual Canister 0.2 Gal vacuum Capacity Applies for: Code Model ASD-120 103159 ASD-120 Read this manual thoroughly CAUTION before using the tool.
-
Page 2: Table Of Contents
Parts Please keep this manual for future references. Assembly The illustrations in this manual are for reference Start Up only and may differ from the real appearance of the tool. Maintenance Troubleshooting Authorized service centers Warranty policy ASD-120 ENGLISH... -
Page 3: Technical Data
The thermal insulation class of the motor windings: Class B WARNING If the power cable is damaged, it must be replaced by the manufacturer or an Authorized TRUPER Service Center to prevent any risk of electric shock or significant accidents. The electrical insulation of this tool is altered by splashes or spillage of liquids during its operation. -
Page 4: General Safety Warnings For Electric Tools
A moment of distraction while using the tool can cause personal injury. Use safety equipment. Always wear eye protection. Service Repair the tool at an Authorized TRUPER Service Center using The use of safety equipment such as safety glasses, dust mask, slip-resistant only identical replacement parts. -
Page 5: Safety Warnings
Authorized TRUPER Service Center. • Turn off the vacuum cleaner before unplugging it. • Unplug it from the power outlet when not in use or before servicing. -
Page 6: Parts
Parts Full tank indicator Clip Power on/off button Cord rewind button Suction port Dust collecting Telescopic tube Wheel Front cover Carrying handle Floor nozzle with squeegee and brush Filter cover Suction regulator Grip Retractable power cord Hose Flexible hose connector 2-in-1 nozzle brush/ crevice tool Assembly... -
Page 7: Start Up
Start up On and Off • To pull out the cable, pull it to the desired length (A). • Press the power on/off button to turn on the vacuum cleaner (B). • When cleaning is done, disconnect the plug from the power outlet and lightly press the power cord rewind button (C). -
Page 8: Maintenance
• Tool servicing should only be performed at an • Always keep the ventilation openings free and clean. Authorized TRUPER Service Center. Service and Blow regularly with compressed air or clean with a brush. maintenance performed by unqualified persons can be •... - Page 9 Carbon brush replacement • Carbon brushes should be periodically inspected and • The included filter is made of high-quality materials always replaced by an Authorized TRUPER Service Center designed to trap small dust particles. when worn out. • To collect dust, the filter must be dry. If it is wet, it will •...
-
Page 10: Troubleshooting
• Check the power supply, cable, circuit breakers, and fuses. not working. • Defective cable. • Unplug and check the power cable. If damaged, it should be repaired at an Authorized TRUPER Service Center. • Full bag. • Empty and clean the dust collecting bag. Dust is expelled from •... -
Page 11: Authorized Service Centers
In the event of any problem contacting an Authorized Truper Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-873 to get information about the nearest Service Center. -
Page 12: Warranty Policy
It includes transportation expenses for the product resulting from its service network compliance. Tel. 800-018-7873. Made in/Hecho en China. Importer TRUPER, S.A. de C.V. Parque Industrial 1, Parque Industrial Jilotepec, Jilotepec, Edo. de Méx. C.P. 54257, Tel. 761 782 9100.
Need help?
Do you have a question about the ASD-120 and is the answer not in the manual?
Questions and answers