Page 1
Manual 1.8 L Canister 0.4 gal vacuum Capacity Applies for: Code Model 103190 ASD-150 ASD-150 Read this manual thoroughly CAUTION before using the tool.
Parts Please keep this manual for future references. Assembly The illustrations in this manual are for reference Start Up only and may differ from the real appearance of the tool. Maintenance Troubleshooting Notes Authorized service centers Warranty policy ASD-150 ENGLISH...
The thermal insulation class of the motor windings: Class B WARNING If the power cable is damaged, it must be replaced by the manufacturer or a TRUPER Authorized Service Center to prevent any risk of electric shock or significant accidents. The electrical insulation of this tool is altered by splashes or spillage of liquids during its operation.
A moment of distraction while using the tool can cause personal injury. Use safety equipment. Always wear eye protection. Service Repair the tool at an Authorized TRUPER Service Center using The use of safety equipment such as safety glasses, dust mask, slip-resistant only identical replacement parts.
Authorized cord, do not pass the cord over sharp edges or corners. TRUPER Service Center. • Keep the cord away from hot surfaces. • Turn off the vacuum cleaner before unplugging it.
Parts HEPA Power on/off Filter button Clip Full tank indicator Cable winding button Dust collecting Suction port Telescopic tube Handle Wheel Front cover Floor nozzle with squeegee and brush HEPA filter cover Sponge Grille filter filter Suction regulator Grip Retractable Hose power cord connector...
Start up On and off • Pull out the cable to the desired length (A). • Press the power on/off button to turn on the vacuum cleaner (B). • When cleaning is done, disconnect the plug from the power outlet and lightly press the power cord rewind button (C).
• The included filters are made of high-quality • Carbon brushes should be periodically inspected and materials designed to trap small dust particles. always replaced by an Authorized TRUPER Service Center • To collect dust, filters must be dry. If they are wet, the when worn out.
• Check the power supply, cable, circuit breakers, and fuses. not working. • Defective cable. • Unplug and check the power cable. If damaged, it should be repaired at an Authorized TRUPER Service Center. • Full bag. • Empty and clean the dust collecting bag. Dust is expelled from •...
In the event of any problem contacting an Authorized Truper Service Center, please see our webpage WWW.TRUPER.COM to get an updated list, or call our toll-free numbers 800 690-6990 or 800 0187-873 to get information about the nearest Service Center.
TRUPER. To enforce the warranty, present the product, sealed policy, invoice, or receipt, at the establishment where you purchased it or at Corregidora 35, Centro, Cuauhtémoc, CDMX, 06060, where you can also purchase parts, components, consumables, and...
Need help?
Do you have a question about the ASD-150 and is the answer not in the manual?
Questions and answers