Canon PIXMA TS8870 Installing

以下步驟及畫面僅供參考，實際操作畫面可能因裝置型號、系統或軟件版本而有所不同。
The following steps and screens are for reference only, and the actual operation screens may vary depending on
the device model, system, or software version.
無線設定 Wireless Setup
確保在開始無線連接設定之前，印表機已開啟。
1.
如果電源開啟，電源指示燈閃爍，然後持續亮起。
Make sure printer is turned on before starting wireless connection setup.
If the power is on, the ON lamp flashes and then remains lit.
選擇
2. [主頁(HOME)]。
Select (HOME).
點選 。
3.
根據印表機的網路連接狀態，
Tap .
The appearance of
在 Windows 以無線方式安裝及連接 PIXMA TS8870 打印機
Installing PIXMA TS8870 on Windows via WiFi connection
[網路]的外觀會有所不同。
(Network) varies depending on the printer's network connection status.
1