Brake Force Display - BMW X5 2004 Owner's Manual

2-axle self-leveling suspension
96n
Lowering
Available with ignition key in position 2.
From Standard to Access:
1. Press button 2 while traveling at less
than approx. 50 mph/80 km/h. The
system enters its preselection mode.
The preselection mode is canceled
> by pressing button 1
> automatically once the vehicle
exceeds a speed of approx.
50 mph/80 km/h or roughly
60 seconds after button 2 is
pressed
2. Reduce speed to below approx.
15 mph/25 km/h within roughly
60 seconds after pressing button 2.
When you press button 2 at
speeds below approx. 15 mph/
25 km/h the system automatically low-
ers the vehicle to the Access
*
From Off-Road to Standard:
> Press button 2 or
> automatically once you exceed a
speed of approx. 30 mph/50 km/h.
level.<
Online Edition for Part No. 01 41 0 157 897 - © 08/03 BMW AG

Brake force display

The Brake force display indicates the
intensity with which you are applying
your brakes to drivers of following vehi-
cles.
The display consists of two stages:
> Normal braking:
The brake lamp units within the tail
lamps and the high-mount brake
lamp integrated within the rear
spoiler both light up with normal
intensity
> Hard braking or braking with ABS
active:
The tail lamps also light up with the
same intensity as the standard brake
lamp units to enhance the warning
effect of the brake lamps.