Dsc Dynamic Stability Control - BMW X5 2004 Owner's Manual

Antilock Brake System
Malfunction
Please be sure to observe the informa-
tion on the ABS warning lamp on
page 20 and on the possible lamp com-
binations that can light up on page 19.

DSC Dynamic Stability Control

The concept
DSC maintains vehicle stability, even in
critical driving situations.
The DSC is operational every time you
start the engine.
The system optimizes the driving stabil-
ity during acceleration and when start-
ing from a standstill. The system recog-
nizes any tendency for the vehicle to
assume an unstable attitude such as
oversteer or understeer; it then coun-
teracts this tendency with a combina-
tion of graduated reductions in engine
torque and selective braking interven-
tion at individual wheels. DSC provides
optimized stability within the limits
defined by the laws of physics.
The laws of physics cannot be
repealed, even with DSC.
An appropriate driving style always
remains the responsibility of the driver.
We therefore urge you to avoid using
the additional safety margin of the sys-
tem as an excuse for taking risks.
Do not make any modifications to the
DSC system. Never allow anyone other
than authorized professional techni-
cians to carry out service or repairs on
the system.<
Online Edition for Part No. 01 41 0 157 897 - © 08/03 BMW AG
Indicator lamps
The indicator lamps in the instrument
cluster go out shortly after you switch
on the ignition.
The indicator lamp flashes:
DSC is active and governs drive
and braking force.
The indicator lamp stays lit:
DSC has been switched off using the
button and the stabilizing interventions
are no longer available.
91n