Safety Belts; Seat And Mirror Memory - BMW M3 CONVERTIBLE 2002 Owner's Manual

Safety belts

48n
Drive with your safety belt on
Even though there is an airbag, wear a
safety belt every time you get in the
vehicle, because airbags enhance
safety by providing added protection.
Before putting your safety belts on
in the rear, take them out of the
holder.<
To close
Make sure you hear the lock engage in
the belt buckle.
To open
1. Press the red button in the belt
buckle
2. Hold the belt
3. Guide the belt back into its reel.
Safety belt height adjustment
The front safety belt automatically
adjusts your body size via the setting of
the head restraint height, refer to
page 46.
If the safety belt system has been
subjected to the stresses involved
in an accident or otherwise damaged:
Have the entire safety belt mechanism
replaced by your BMW center,
including the safety belt tensioner. In
addition, have your BMW center
inspect the safety belt anchors. If a
child-restraint system was in the
vehicle during an accident, consult the
manufacturer's instructions regarding
replacement.<

Seat and mirror memory

You can store and recall three different
driver's seat and outside mirror posi-
tions.
The setting for the lumbar support
is not stored in memory.<
To store
1. Ignition key in position 1 or 2
2. Adjust your seat and outside mirrors
to the desired position.
M
3. Press the EMORY button: the indi-
cator lamp in the button lights up
4. Press memory button 1, 2 or 3, as
desired. The indicator lamp goes out.
Online Edition for Part No. 01 41 0 156 249 - © 09/01 BMW AG