BMW M COUPE Manual page 58

Child restraint systems
58n
Child restraint installation
The safety belt on the passenger side
can be locked for mounting and secur-
ing child restraint systems.
A label with operating instructions is
attached to the belt next to the sliding
latch plate.
*
To lock the belt
Extract the entire length of the belt from
the inertia reel mechanism. Allow the
reel to retract the belt somewhat and
engage the buckle, then tighten the belt
against the child restraint system. The
retraction mechanism is now locked.
The belt cannot be retracted further.
Comply with the installation instructions
provided by the manufacturer of the
child restraint system.
To release the belt
Release the buckle, remove the child
restraint system and allow the inertia
reel to retract the belt completely.
Z3 coupe, M coupe
For the use of child restraint systems
with a tether strap, an additional mount-
ing point is provided in the coupe at the
right rear on the roof frame. Attach the
tether strap hook to the mounting point.
Adjust the tether strap according to the
child restraint manufacturer's instruc-
tions.
Online Edition for Part-No. 01 41 0 155 149 - © 08/99 BMW AG
Z3 coupe