BMW M COUPE Manual page 47

Power convertible top, roadster
To mount the cover
The illustration depicts a representative
schematic of the fasteners for the con-
vertible cover.
To secure, press the outer ring of the
cover fastener onto the mating piece on
the vehicle (refer to the arrows).
*
The attachment points of the cover are
indicated by the four arrows in the illus-
tration.
1 Position the convertible cover on the
convertible top well and align the up-
per portions of the fasteners with the
lower portions on the vehicle.
2 Lift the cover at the rear, reach
underneath it and engage the two
middle attachments.
3 Attach the front fasteners.
4 Push the peripheral frame of the
cover under the edge of the convert-
ible top well.
5 Check the convertible cover to be
sure it is properly secured.
In order to avoid soiling of the in-
side of the convertible top, always
drive with the cover secured in
Be sure that the cover is secured
properly on the vehicle. If it is not
firmly secured, the flow of air while driv-
ing could loosen the cover at higher
speeds.<
Online Edition for Part-No. 01 41 0 155 149 - © 08/99 BMW AG
47n
place.<