Table of Contents
Advertisement
Using a battery of the
wrong type or inserting the
battery with the polarity reversed
can cause irreparable damage to
the device.
Use only the specified type of
battery (see "Technical Data").
When inserting the battery,
always make sure polarity is
correct.
Slip the new battery into posi-
tion, making sure that the pos-
itive terminal of the battery is
facing up.
Position the bottom part of the
housing at projection 9 of the
front edge and close the hous-
ing, noting two guide pins 7.
Install screw 4.
The LED on the remote con-
trol lights up, indicating that the
remote control has to be syn-
chronised.
To synchronise the remote
control, make sure that it is
within range of the receiver and
press button 1 twice.
LED 3 starts flashing and then
goes out after a few seconds.
The remote control is again
ready for use.
3
15
z
Hide quick links:
Advertisement
Table of Contents
