Platform Assembly Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003770 Page 8 REV A 5/22/07...
Page 9
Winch Tube Assembly WINCH TUBE SERVICE INSTRUCTIONS The winch tube assembly was pre-assembled at the factory. It is important that the internal parts and cable routings are assembled properly in order for the winch tube assembly to function properly. It also requires special tools during the as- sembly process. It is therefore recommended that you con- tact your local dealer should you ever have issues with the winch tube assembly. Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003770 Page 9 REV A 5/22/07...
Wheel Assembly Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003770 Page 11 REV A 5/22/07...
Page 12
Bunk Assembly Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003770 Page 12 REV A 5/22/07...
Page 13
U-bolts. This allows you to change the motor stop location to best position your boat on the hoist. Once the assembly is in the proper position, tighten the nuts on the U-bolts. Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003770 Page 13 REV A 5/22/07...
Page 14
5/16” X 3/4” Hex Bolt - Qty: 16 (0140022) 5/8” Flat Washer Qty: 6 (1340105) 5/8” Brass Hex Nut Qty: 10 (1410362) 3/8” X 3/4” Carriage Bolt - Qty: 8 (0210100) Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorestation.com 0003770 Page 14 REV A 5/22/07...
Need help?
Do you have a question about the SSV50108 and is the answer not in the manual?
Questions and answers