15" x 13-18" under desk adjustable sliding tray (3 pages)
Summary of Contents for Vivo STAND-LAP5F
Page 1
VESA Compatible Laptop Tray with RGB Fan SKU: STAND-LAP5F Instruction Manual Assembly Video & Product Info www.vivo-us.com/products/stand-lap5f...
Page 2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please contact our product support team at 309-278-5303 or help@vivo-us.com for further assistance. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Page 3
Package Contents A (x1) B (x2) C (x2) Laptop Tray Clip Included Hardware & Tools S-A (x4) S-B (x4) M4x12mm Screw M5 Washer Tools Needed: Weight Capacity: 19.8lbs (9kg) Phillips Screwdriver...
ASSEMBLY STEPS STEP 1 Place Clips (C) through the front of the Laptop Tray (A), with Prongs facing the back of the Tray. One set of Prongs should be in the outer Slot and the other set overhanging the Tray. Front of Tray Front of Tray Back of Tray...
Page 5
STEP 1 - Cont’d Press Arms (B) from the backside of Tray into Prongs on Clips (C), ensuring all four snap into place. Prongs...
Page 6
STEP 2 Install Laptop Tray (A) to a VESA plate using the M4x12mm Screws (S-A) and M5 Washers (S-B). Tighten the screws using a Phillips screwdriver.
Page 7
STEP 3 Adjusting Locking Laptop Arms Pull tabs on Locks on the underside of Arms (B) and extend the Arms out. Locks Place your laptop on the tray, then adjust Arms (B) to the width of your laptop and en- gage Locks to secure laptop.
Page 8
LAST UPDATED: 7/31/24 REV1.1 v1.0 Need Help? Get In Touch Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com www.vivo-us.com 309-278-5303 Chat live with an agent! FOR MORE GREAT VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM VIVO-us @vivo_us...
Need help?
Do you have a question about the STAND-LAP5F and is the answer not in the manual?
Questions and answers