Advertisement
Quick Links
Model-One System User Manual
·
OVERVIEW
The ThinkGrow Model-One System is a modular grow light system designed to allow users to customize
their lighting setup and to provide even lighting for all shape and size spaces. The Model One System
combines LED light bars, individual LED drivers and integrated communication & power cords to create a
complete lighting system. Growers can plug-and-play FIVE different types of LED bars to further customize
their system. Each LED bar is listed at 90 watts of light. Growers can position each of the Model One drivers
close together for high PPFD applications like flowering, or space them further apart for small plants and
vegetative areas that do not require high PPFD.
The Model-One System provides two types of replaceable LED drivers. The standard model driver called the
TLD-2 features 2 channels of control, with each channel controlling a certain type LED diode on the LED
bars. The TLD-4 driver offers 4 channels of advanced spectrum control allowing Full spectrum, Deep Red, Far
Red and UV diodes to be controlled separately. Using either model will allow growers to change the light
spectrum according to the different stages of their plants.
·
INSTALLATION
1.Position and install the MQM unistrut nuts securely into the steel C-Channel. Slide them to the correct
location to achieve the spacing desired between each LED driver. Twist them 90' counter-clockwise to lock
the unistrut nuts in place.
01
Advertisement
Related Manuals for TrolMaster ThinkGrow One TLD-2+DR-1
Summary of Contents for TrolMaster ThinkGrow One TLD-2+DR-1
- Page 1 Model-One System User Manual · OVERVIEW The ThinkGrow Model-One System is a modular grow light system designed to allow users to customize their lighting setup and to provide even lighting for all shape and size spaces. The Model One System combines LED light bars, individual LED drivers and integrated communication &...
- Page 2 2.Attach the ThinkGrow Light Driver (TLD) to the C-channel steel using the Hex Socket Head Cap Screws. 3.Ensure that the drivers are installed in an alternating pattern so that the male / female TDC cables will match up to the correct connection on the end of the Model One Drivers. *NOTE: Each group of Model One drivers will be connected to the power source using one of the TDC-240 power cables.
- Page 3 TDC-120/240 EC-120/240 TDC-1 TDC-2/3/4 TDC-2/3/4 TDC-2/3/4 4. To set up the daisy chain configuration, first connect the TDC-120/240 or EC-120/240 and TDC-1 to the input port of the first driver. Users can use an ECS-9 cable to connect the split head of the TDC-120/240 to the controller.
-
Page 4: Specification
· MODEL ONE SYSTEM COMPONENTS Light Drivers Model One(TLD-2+DR-1) Horticulture LED Grow Light Specification PPF: > 243 umol/s Efficacy: >2.7 µmol/J Input Power: 90 W Input Voltage: 100~277VAC / 50/60Hz Power Factor: ≥96% Amperage Draw: 0.77A@120V / 0.39A@240V / 0.35A@277V LED LM Rating and Lifetime: L90: >54,000 hours Ingress Protection (IP Rating):... - Page 5 Model One(TLD-2+FR-1) Horticulture LED Grow Light Specification PPF: > 234 umol/s Efficacy: >2.6 µmol/J Input Power: 90 W Input Voltage: 100~277VAC / 50/60Hz Power Factor: ≥96% Amperage Draw: 0.77A@120V / 0.39A@240V / 0.35A@277V LED LM Rating and Lifetime: L90: >54,000 hours Ingress Protection (IP Rating): IP56 Temperature: 32-104ºF (0-40ºC)
- Page 6 Model One(TLD-4+TLB-1) Horticulture LED Grow Light Specification PPF: > 243 umol/s Efficacy: >2.7 µmol/J Input Power: 90 W Input Voltage: 100~277VAC / 50/60Hz Power Factor: ≥96% Amperage Draw: 0.77A@120V / 0.39A@240V / 0.35A@277V LED LM Rating and Lifetime: L90: >54,000 hours Ingress Protection (IP Rating): IP56 Temperature: 32-104ºF (0-40ºC)
- Page 7 Model One(TLD-4+TLB-2) Horticulture LED Grow Light Specification PPF: > 252 umol/s Efficacy: >2.8 µmol/J Input Power: 90 W Input Voltage: 100~277VAC / 50/60Hz Power Factor: ≥96% Amperage Draw: 0.77A@120V / 0.39A@240V / 0.35A@277V LED LM Rating and Lifetime: L90: >54,000 hours Ingress Protection (IP Rating): IP56 Temperature: 32-104ºF (0-40ºC)
-
Page 8: Input Voltage
Notice: This control circuit is not isolated-see installation instructions. 10 UNITS MAXIMUM À utiliser avec le modèle de tube LED horticole __ de TrolMaster Agro Instruments Co., Ltd uniquement. CONNECTEZ SEULEMENT À DES UNITÉS ADJACENTES CAUTION – RISK OF SHOCK. DISCONNECT POWER BEFORE RELAMPING ATTENTION –... - Page 9 *Minimum distance between drivers should be longer than 115mm. A scale plate is attached for your reference Light Bars Model One 4’ LED Bar with UV Light Spectrum Channel (UV-1) Input Power Mounting Height Input Power Height >6" (15.2cm) Above Canopy >...
- Page 10 4' LED Bar with 4x Spectrum Channels (White+ Deep Red+ Far Red+ UV) for Model One LED System (TLB-1) Input Power Mounting Height Input Power Height >6” (15.2cm) Above Canopy > 243 umol/s Dimensions/Weight Lifetime Package Content 45.35"(L) x 2.68"(W) x 2.20"(H) Size Lifetime L90:>...
- Page 11 4' Inner Canopy LED Bar with Built-in 120 Watt Driver (ICL-300) Input Power Input Voltage Input Power 120W Input Voltage 100-277V, 50/60Hz >314umol/s Dimensions/Weight Lifetime Package Content 46.21"(L) x 3.60"(W) x 2.64"(H) Size Lifetime L90:> 54,000 hrs Package Content 1x ICL-300 light bar Gross Weight 2.8kg / 6.17lbs Specification...
- Page 12 CONVIENT AUX EMPLACEMENTS HUMIDES CAUTION – RISK OF SHOCK. DISCONNECT POWER BEFORE RELAMPING À UTILISER AVEC LE MODÈLE DE PILOTE DE LED HORTICOLE __ DE TROLMASTER AGRO INSTRUMENTS CO., LTD UNIQUE- MENT. ATTENTION – RISQUE D’ÉLECTROCUTION. DÉBRANCHER L’ALIMENTATION AVANT DE REMPLACER LA LAMPE.
- Page 13 1ft AWG #18 Daisy Chain Cord for Model One LED System (TDC-2) The TDC-2 is a 1ft long interconnecting cable. Length Length 1’ Input Voltage Temperature Range 100-277V~, 50/60Hz Input Voltage Temp 32~104°F 2ft AWG #18 Daisy Chain Cord for Model One LED System (TDC-3) The TDC-3 is a 2-ft long interconnecting cable.
- Page 14 5ft AWG #18 Daisy Chain Cord for Model One LED System (TDC-4) The TDC-4 is a 5-ft long interconnecting cable. Length Length 5’ Input Voltage Temperature Range 100-277V~, 50/60Hz Input Voltage Temp 32~104°F 7ft Splitter Power Cord for Model One LED system AWG #18 with NEMA 5-15 plug (TDC-120) Input Voltage Length...
- Page 15 7ft Splitter Power Cord for Model One LED system AWG #18 with NEMA 6-15 Plug (TDC-240) Input Voltage Length Input Voltage 240VAC, 50/60Hz Length 7’ Temperature Range Temp 32~104°F 7ft Splitter Power Cord for Model One LED system AWG #18 with CEE 7/7 Plug (for EU) Input Voltage Length...
- Page 16 * The TDC-120/240/240E cable is required for the Model-One System, but it is not included in the package content, users need to order the TDC-120/240/240E cable separately. TDC-120 is optional for users who want to use 120V while TDC-240 is optional for users who want to use 240V. TDC-240E is designed for Europe plug type.
- Page 17 For any issues or concerns with our products, DO NOT return them to the store. Please contact our tech support department at support@trolmaster.com or call 877-420-9876. February 2025 ©2025 TrolMaster™ All rights reserved.
Need help?
Do you have a question about the ThinkGrow One TLD-2+DR-1 and is the answer not in the manual?
Questions and answers