Dell Diagnostics - Dell Inspiron One 0DTN4TA00 Setup Manual

Model w01b, type w01b001
Table of Contents

Advertisement

Using Support Tools

Dell Diagnostics

If you experience a problem with your
computer, perform the checks in "Lockups and
Software Problems" on page 39 and run the
Dell Diagnostics before you contact Dell for
technical assistance.
It is recommended that you print these
procedures before you begin.
NOTE: Dell Diagnostics works only on Dell
computers.
NOTE: The Drivers and Utilities disc
is optional and may not ship with your
computer.
See the Dell Technology Guide to review your
computer's configuration information, and
ensure that the device that you want to test
appears in the system setup program and is
active.
Start the Dell Diagnostics from your hard drive
or from the Drivers and Utilities disc.
44
Starting Dell Diagnostics From Your
Hard Drive
The Dell Diagnostics is located on a hidden
diagnostic utility partition on your hard drive.
NOTE: If your computer cannot display
a screen image, contact Dell (see
"Contacting Dell" on page 60).
1.
Ensure that the computer is connected to an
electrical outlet that is known to be working
properly.
2.
Turn on (or restart) your computer.
3.
When the DELL
logo appears, press <F12>
immediately. Select Diagnostics from the
boot menu and press <Enter>.
This will invoke the Pre-Boot System
Assessment (PSA) in some computers.
NOTE: If you wait too long and the operating
system logo appears, continue to wait until
you see the Microsoft
then, shut down your computer and try again.
Windows
desktop;
®
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents