Minolta VECTIS 3000 Manual page 28

DATE IMPRINTING - Setting the Date and Time
4. Repeat the step 3 until all items in the date
and time display are correct.
5. Press the select button until all items stop
blinking to set the updated information.
• The data panel shows the date display briefly,
then the camera exits the set date/time mode.
The data panel will show the imprinting option
(date, time, or no imprinting) that was selected
before going to set date/time mode.
52
DATE IMPRINTING - Changing the Format
The order of year/month/day can be changed.
1. Open the lens cover to turn the camera
on.
2. Press and hold the date button for two
seconds.
• The date display will appear in the data panel,
and the year will blink.
Continued on following page.
53