Replacing The External Modem Connector - Dell Dimension T8243 Owner's Manual

3 Remove the existing modem:
Disconnect the modem cable from the modem.
a
Use a small Phillips screwdriver to remove the two screws securing the modem to the
b
system board, and set the screws aside.
Pull straight up on the attached pull-tab to lift the modem out of its connector on the
c
system board.
NOTICE:
connectors and realign the card.
4 Install the new modem:
Align the modem with the screw holes and press the modem into the connector on the
a
system board.
Use a Phillips screwdriver to replace and tighten the two screws that secure the modem to
b
the system board.
Connect the modem cable to the modem.
c
5 Replace the computer cover (see page 91).

Replacing the External Modem Connector

1 Follow the procedures in "Before You Begin" on page 53.
2 Remove the computer cover (see page 59).
3 Remove the modem cable from the modem.
4 Remove the external modem connector:
Remove the screw that secures the external modem connector.
a
Slide the external modem connector away from the slot that holds the modem connector
b
in place.
Lift the modem cable and connector from the computer.
c
88
Removing and Installing Parts
The connectors are keyed to ensure correct insertion. If you feel resistance, check the