Dell Dimension T8243 Owner's Manual page 45

Dell desktop computer owner's manual
Table of Contents

Advertisement

Light Pattern
Problem Description
A possible expansion card failure has
occurred.
Another failure has occurred.
The computer is in a normal operating
condition after POST.
Suggested Resolution
1
Determine if a conflict exists by
removing a card (not a graphics card)
(see page 66) and restarting the
computer.
2
If the problem persists, reinstall the
card that you removed, remove a
different card, and then restart the
computer.
3
Repeat this process for each card. If the
computer starts normally, troubleshoot
the last card removed from the
computer for resource conflicts (see
page 49).
4
If the problem persists, contact Dell
(see page 108).
• Ensure that the cables are properly
connected to the system board from
the hard drive, CD drive, and DVD
drive (see page 62).
• If there is an error message on your
screen identifying a problem with a
device (such as the floppy drive or hard
drive), check the device to make sure it
is functioning properly.
• The operating system is attempting to
boot from a device (such as the floppy
drive or hard drive); check system
setup (see page 97) to make sure the
boot sequence is correct for the devices
installed on your computer.
• If the problem persists, contact Dell
(see page 108).
None.
Troubleshooting Tools
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Optiplex dhpDimension 5100c

Table of Contents