Memory Function - Minolta FLASH METER VI Instruction Manual

Special Functions

Memory function

To store measurement data in memory of the Flash Meter VI, simply press
the MEMORY button. Up to ten pieces of data (including incident light
measurement data and spot measurement data) can be stored.
To display the incident light measurement data stored in memory on the
pointer of the analog scale L, simply press the incident light measuring
button. To display the spot measurement data stored in memory on the
pointer of the analog scale R, simply press the spot measuring button. With
the memory function, you can check the lighting ratio graphically on the
analog scale. This function is useful for lighting adjustments. (See p. 58.)
1
Press the CLR button to
clear existing memory
data.
E42
2
After taking the first
measurement, press the
MEMORY button.
● Press and hold the MEMORY
button to display the number of
measurement results stored in
memory.
When the MEMORY button is
released, the measured value
is stored in memory and the
pointer corresponding to the
measured value light up.
Special Functions
3
After taking the second
measurement, press the
MEMORY button to store
the second measurement
result in memory.
Repeat the above steps as
many times as required.
● Press and hold the MEMORY
button to display the number of
measurement results stored in
memory.
E43