Table of Contents
Advertisement
EXPOSURE – Bracketing
Metered Exposure
1/2 Stop Under
This function automatically exposes a 3 frame 1/2 stop increment
bracketed series. The order of the exposures will be the metered
exposure, 1/2-stop under the metered exposure, 1/2 stop over the
metered exposure.
• The automatic bracketing feature cannot bracket flash exposures.
This effect is most visible when slide film is being used.
1. Turn the function dial to
2. Press the function button and
turn the control dial until
appears in the data panel.
•
the function button is released.
60
1/2 Stop Over
.
appears in the frame counter after
EXPOSURE – Bracketing
3. Select the desired drive
mode.
• The drive mode is initially set to single
(
) or continuous (
) whichever was
set with exposure bracketing last.
4. Focus on and frame your
subject, then press the
shutter-release button all the
way down to take the picture.
Hold the shutter-release button
down until the series is finished.
Press the shutter-release button
for each exposure.
• Exposure is locked on the first frame of the
series.
• The exposure settings will change
automatically.
Flash Notes
• The built-in flash is set to flash cancel (
selected.
• An attached Minolta accessory flash will be set to off when
bracketing is selected.
• If an AF series flash is mounted and on when bracketing is
selected,
will blink in the data panel and the shutter
will lock until the flash is turned off.
) when bracketing is
61
Hide quick links:
Advertisement
Table of Contents
