Clarion P11 User Manual
Clarion P11 User Manual

Clarion P11 User Manual

Car mp3/usb/sd/fm/bluetooth player

Advertisement

Quick Links

Clarion P11
Car Mp3/USB/SD/FM/Bluetooth player
User Manual
DEAR CUSTOMER
Congratulations for your purchase!
Please read this manual carefully, and keep it for future reference.
CONTENTS

TABLE OF CONTENTS

Thank you for buying this product! Please read through these instructions so you will know
how to install and operate your model properly. After you have finished reading the
instructions, put them away in a safe place for future reference.
Bluetooth operations: 10-11
INSTALLATION
PRECAUTIONS
Choose the mounting location where the unit will not interfere with the normal driving
function of the driver.
Before finally installing the unit, connect the wiring temporarily and make sure it is all
connected up properly and the unit and the system work properly.
Use only the parts included with the unit to ensure proper installation. The use of
unauthorized parts can cause malfunctions.
Consult with your nearest dealer if installation requires the drilling of holes or other
modifications of the vehicle.
Install the unit where it does not get in the driver's way and cannot injure the
passenger if there is a sudden stop, like an emergency stop.
If installation angle exceeds 30° from horizontal, the unit might not give its optimum
performance.
Avoid installing the unit where it would be subject to high temperature, such as from
direct sunlight, or from hot air, from the heater, or where it would be subject to dust,
||English

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P11 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Clarion P11

  • Page 1: Table Of Contents

    Clarion P11 Car Mp3/USB/SD/FM/Bluetooth player ||English User Manual DEAR CUSTOMER Congratulations for your purchase! Please read this manual carefully, and keep it for future reference. CONTENTS TABLE OF CONTENTS Thank you for buying this product! Please read through these instructions so you will know how to install and operate your model properly.
  • Page 2: Installation

    dirt or excessive vibration. Installation hole size • Length: 182mm • Width: 53mm DIN FRONT-MOUNT Installing the unit (Fig 1) 1. Dashboard 2. Holder After inserting the holder into the dashboard, select the appropriate tab according to the thickness of the dashboard material and bend them inwards to secure the holder in place.
  • Page 3: Buttons Function

    • B5: Speaker out Left front+ (White) • B6: Speaker out Left front- (White black) • B7: Speaker out Left rear+ (Green) • B8: Speaker out Left rear- (Green black) Left audio output (White) Right audio output (Red) Sub-woofer audio output (Green) 4-8Ω...
  • Page 4: General Operations

    21. LCD display GENERAL OPERATION Turn unit ON/OFF Press the power ( ) button to turn ON the unit, and press and hold it again to turn OFF the unit. MODE Press the SRC ( ) button to select between RADIO-USB-SD-Bluetooth-AUX modes of operation are indicated in the LCD display.
  • Page 5: Aux Input

    Press SEL button to select DX, then rotate the SEL button to select DX/LOCAL (only radio mode). USB port The USB port for playing media from USB memory. The MIC Used for voice or hands-free calls to receive sound. Micro SD card port The port for playing media from micro SD card memory.
  • Page 6 In Radio mode, press the BAND button to switch between the FM1-FM2-FM3 bands, each band stores up to six preset stations. Auto seek tuning (/++) In Radio mode, press the or + button on the front panel or on the remote control to auto seek the radio frequency.
  • Page 7: Make A Call

    2. When the phone finds this car audio system, the "CLARION" will be displayed. 3. Choose the "CLARION" from the device list to pair and connect with this car audio system. Upon confirming, the BT logo will be lighted on.
  • Page 8: Phone App Control Operation

    Remote insulating sheet The remote control comes with an insulating sheet attached to the underside of the remote control, as illustrated on the right. The remote control will not work until the insulating sheet is removed. Replace lithium battery cell 1.
  • Page 9: Specification

    Main menu Radio Bluetooth AUX in Background balance & fader treble & bass setup Time External SWC SPECIFICATION General • Power Supply Requirements: DC 12V, Negative Ground • Maximum Output Power: 25W x 4(CH) • Chassis Dimensions: 178 x 110 x 50mm (W x D x H) Tone Controls •...
  • Page 10 Problem Causes Solution power supply properly The car ignition key has not connected to the car accessory terminal, been switched on No Power switch the ignition key to ACC. The fuse is blown Replace a new fuse Volume is at minimum Adjust volume to desired level No Sound Wiring...

Table of Contents