Shutter Priority - S - Konica Minolta DYNAX 30 Instruction Manual

SHUTTER PRIORITY - S

Shutter priority is selected with the function dial (p. 36). Shutter
speeds not only control exposure, but also the apparent sharpness
of moving objects, see page 30.
1
Shutter
speed
40 A
DVANCED OPERATION
Turn the control dial (1) to adjust the shutter speed
between 30 and 1/2000 second. The speeds can
be seen on the data panel.
Pressing the shutter-release button
2
partway
corresponding aperture. Press the
shutter-release button all the way
down to take the picture.
If the required exposure is beyond the
aperture range, the aperture display
blinks on the data panel and in the
viewfinder. One of the viewfinder
exposure indicators blink to show if the
displayed
underexposure (<) or overexposure (>).
Adjust the shutter speed until the
displays are steady.
To use fill flash, press the flash-mode (3)
button to raise the flash. The shutter
speed cannot exceed the flash-sync
3
speed of 1/90 second.
Flash range is dependent on the
aperture, see page 25. To cancel the
flash, push the flash head down.
down (2) displays
exposure will
the
cause