Advertisement
Quick Links
Do not use powered screw drivers for adjustment.
FITTINGS
2 of M6x40 Button head machine screw
2 of M5x14 Socket head machine screw
35 of 4x16 Self-tapping screw
COMPONENTS
A. Back Frame
B. Front Frame
C. Slide Kit
D. Soft close kit
E. Plastic Support
F. Rotation bracket
G. Plastic guide
H. Door slide bracket
I. Drag Lever
L. Junction
M. Cap with pin
N. Basket hook kit
O. Plastic drilling guide
P. Baskets set
MAINTENANCE
Clean with a soft, dry cloth. Avoid using solvents or abrasive.
TOOLS
B
O
A
N
E
Storg Elska Swing-Out Pro Larder
Tall
ST22SPT.450.CPWH
ST22SPS.450.CPWH
ST22SPT.500.CPWH
ST22SPS.500.CPWH
ST22SPT.600.CPWH
ST22SPS.600.CPWH
L
I
F
M
Short
P
D
G
H
C
Advertisement
Related Manuals for Furnware Storg Elska Swing-Out Pro ST22SPT.450.CPWH
Summary of Contents for Furnware Storg Elska Swing-Out Pro ST22SPT.450.CPWH
- Page 1 Storg Elska Swing-Out Pro Larder Tall Short ST22SPT.450.CPWH ST22SPS.450.CPWH ST22SPT.500.CPWH ST22SPS.500.CPWH ST22SPT.600.CPWH ST22SPS.600.CPWH Do not use powered screw drivers for adjustment. FITTINGS 2 of M6x40 Button head machine screw 2 of M5x14 Socket head machine screw 35 of 4x16 Self-tapping screw COMPONENTS A.
- Page 2 Mechanism is supplied in the left hand version. Follow step 1 to swap to right hand version. 2 of M5x14 Socket head machine screw Move the cap with pin (M) and the junction (L), as in (fig 1) on the front frame. Move the small plate along with the pin into the right side of the back frame (fig 2).
-
Page 3: Drilling Template
20 of M4x16 Self-tapping screw Attach the Slide kit (C), the plastic support (E), the soft close kit (D) and the plastic slide LH drawing shown (G) following the dimensions shown. 91,50 DRILLING TEMPLATE Use the plastic drilling 91,50 guide (O) to mark positions for plastic supports, ST22SPT.450.CPWH ST22SPT.500.CPWH... - Page 4 2 of M6x40 Button head machine screw Screw the back frame (A) into the slide kit (C) and fix the drag levers (I) as shown. Put the back frame (A) into the plastic guide (G) and the lower slide (C) as shown.
- Page 5 2 of M5x14 Socket head machine screw Assemble the slide cover by using the 2 socket head screws provided 4 of 4x16 Self-tapping screw Put the front frame (B) into the pre-assembled plastic supports (E) and then attach the third plastic support on the top bracket as shown.
- Page 6 Fix the drag levers (I) with the specific provided hardware. Assemble the soft close kit (D) when the mechanism is closed. FIG 3...
- Page 7 8 of M4x16 Self-tapping screw Fit the door slide bracket (H) dimensions shown. ST22SPT.450.CPWH ST22SPT.500.CPWH 1660 ST22SPT.600.CPWH ST22SPS.450.CPWH ST22SPS.500.CPWH 1084 ST22SPS.600.CPWH Assemble the basket hooks (N) and the baskets (P).
Need help?
Do you have a question about the Storg Elska Swing-Out Pro ST22SPT.450.CPWH and is the answer not in the manual?
Questions and answers