Advertisement
Quick Links
EHWBOW36V - Cordless Hot Wire Bow Cutter
EHWBOW120 - 120V Hot Wire Bow Cutter
•
Please read these instructions carefully before operation
•
Take special note of the guidelines and safety prompts in these instructions to avoid
injury to yourself, other people and objects, or damage to the tool.
1-844-TT-TOOLS
www.tapetech.com
User Manual
1327 Northbrook Parkway, Suite 400
TapeTech Tools
Suwanee, GA 30024
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for TapeTech EHWBOW36V
Summary of Contents for TapeTech EHWBOW36V
- Page 1 EHWBOW36V - Cordless Hot Wire Bow Cutter EHWBOW120 - 120V Hot Wire Bow Cutter User Manual • Please read these instructions carefully before operation • Take special note of the guidelines and safety prompts in these instructions to avoid injury to yourself, other people and objects, or damage to the tool.
-
Page 2: Technical Data
Introduction The TapeTech EHWBOW36V Cordless Hot Wire Bow Cutter and the EHWBOW120 Hot Wire Bow Cutter are professional-grade hot wire bow cutters for Expanded Polystyrene (EPS) and Extruded Polystyrene (XPS) foam. The hot wire of the Bow Cutter heats up in seconds to make straight, angled, curved or freeform cuts quickly, cleanly and easily. - Page 3 EHWBOW120 Hot Wire Cutting Bow Assembly 1.Butt the two bow sections together and tighten the bolts. 2. Install the Hot Wire: ② ① ① Attach one end to the hook above. ② Wrap the other end around the pulley, ensuring that the wire is inside the groove.
- Page 4 EHWBOW36V Cordless Hot Wire Cutting Bow Assembly 1.Butt the two bow sections together and tighten the bolts. 2. Install the Hot Wire: ② ① ① Attach one end to the hook above. ② Wrap the other end around the pulley, ensuring that the wire is inside the groove.
- Page 5 Warnings • The use of any hot wire other than authentic TapeTech hot wires may present a risk of tool damage. • When the power is on, do not touch the hot wire. It is recommended to wear gloves when working.
- Page 6 4. Square Tube Plug 5. Wire Take-up Pulley 6. Fixed Nut 7.Wire Harness 8. Fixed Bolts 9. Switch Button 10. Lower Bow Component (EHWBOW36V) 11. Fixed Nut 12. Upper Bow Component (EHWBOW36V/EHWBOW120) 13. Power Supply Module & 140mm Wire Harness 14. Fixed Bolts 15.
Need help?
Do you have a question about the EHWBOW36V and is the answer not in the manual?
Questions and answers