1. Manuals
  2. Brands
  3. TapeTech Manuals
  4. Cutter
  5. EHWJS18X2
  6. Manual

TapeTech EHWJS18X2 Manual

36v portable hot wire foam cutter
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

EHWJS18X2
36V Portable Hot Wire Foam Cutter
Please read these instructions carefully before operation.
Take note of the safety prompts in these instructions to avoid injury to yourself, other people and objects.
Please follow the guidelines in these instructions to avoid damage to the tool.
Caution: Use outdoors or in a well-ventilated space
NOTE: The Power Switch is designed to be manually activated before and throughout the cutting process
for each cut. It should never be placed in a fixed "ON" position using tape, wire ties or other devices.
DO NOT TOUCH HOT WIRE WHEN WORKING!!
TapeTech Tools
1327 Northbrook Parkway, Suite 400
1-844-TT-TOOLS
www.tapetech.com
Suwanee, GA 30024

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EHWJS18X2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TapeTech EHWJS18X2

Summary of Contents for TapeTech EHWJS18X2

  • Page 1 EHWJS18X2 36V Portable Hot Wire Foam Cutter Please read these instructions carefully before operation. Take note of the safety prompts in these instructions to avoid injury to yourself, other people and objects. Please follow the guidelines in these instructions to avoid damage to the tool.
  • Page 2 EHWJS18X2 Key Components Miter Adjustment Knob (upper) Upper Slide Assembly Limiter Blocks Main Panel Support Arms - Left Support Arms - Right Power Switch (on back of Bow) Ruler Support Panel - Left Support Panel - Right Rear Brace Assembly...
  • Page 3 Set Up 2. Set Rear Leg Assembly 1. Attach Front Legs to back of Main Panel 5. Loosen Angle Adjustment 3. Adjust Side Support Arms 4. Loosen Miter Adjustment Knobs Knob and lower Material Support and Rotate Bow into position 6.

  • Page 4: Recommended Use

    Polystyrene (XPS) foam. Installation of the Hot Wire WARNING: Always unplug the power cord of the EHWJS18X2 before installing or changing the hot wire. Allow sufficient cooling time for the hot wire and the springs. It is recommended to use only TapeTech replacement hot Simultaneously…...
  • Page 5 Cutting Grooves The EHWJS18X2 can quickly and cleanly cut square-edged grooves in the face or the edge of EPS or XPS foam panels. To cut grooves, you will need to use the Limiter Blocks located on the Upper and Lower Slide Assemblies.

  • Page 6: Technical Data

    Technical Data Model Number EHWJS18X2 Max. Cutting Height 50.8” (1290 mm) Max. Cutting Thickness 13” (330 mm) Rulers Left: 39” (1000 mm); 0-60º / Right: 15” ( 400 mm) Net Weight 30 pounds (13.5 kg) Assembled Size 63” x 17” x 8” (1610 X 440 X 200 mm) 18V / 2.0 Ah Battery x 2...

  • Page 7: Li-Ion Battery

    Warnings • The use of any hot wire other than authentic TapeTech hot wires may present a risk of tool damage. • When the power is on, do not touch the hot wire. It is recommended to wear gloves when working.

  • Page 8: Spare Parts List

    Spare parts list: 1. Upper sliding rail corner component 14. Rear brace assembly 2. Upper sliding rail 15. Support panel assembly (L) 3. Bow 16. Material support rail 4. Power Switch 17. Switch limit dial indicator 5. M6 extended nut 18.

Table of Contents