Do you have a question about the BPH1009 and is the answer not in the manual?
Questions and answers
Kati Dougall
February 8, 2025
Hi, I **** looking to set the timer on my heater, but I think currently it does not repeat daily, if I follow the instructions ie. Set the timer to come in between 1-16h time, it comes on the once, but not at the same time every day after that. Is there a different setting that can get this working please? Thank you!
Page 2
Fig. 2A Fig. 2B the latest in technology. With normal care and • Heater must be installed at least 0.6m above maintenance, your Bionaire ® Heater will provide the floor or below the ceiling. years of satisfactory performance.
Page 3
BPH1009IUK06EM1.qxd 8/15/06 3:05 PM Page 7 BEFORE STARTING YOUR PANEL HEATER OPERATION without remote • Now please follow the above instructions • Every minute while in “AUTO” mode, the HEATER on how to 'sync' your remote control with remote control communicates with the heater. When the heater is plugged into the mains your unit.
Page 4
The BROWN coloured wire must be connected unlocked to check the time remaining. recycling and WEEE information: to the terminal, which is marked with the letter www.bionaire.com or e-mail AUTO SAFETY SHUT OFF "L" or is coloured RED. info-europe@jardencs.com The BLUE coloured wire must be connected to The heater has a built in safety device which will the terminal, which is marked with the letter "N"...
Need help?
Do you have a question about the BPH1009 and is the answer not in the manual?
Questions and answers
Hi, I **** looking to set the timer on my heater, but I think currently it does not repeat daily, if I follow the instructions ie. Set the timer to come in between 1-16h time, it comes on the once, but not at the same time every day after that. Is there a different setting that can get this working please? Thank you!