READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT. RETAIN THIS OWNER’S MANUAL FOR FUTURE REFERENCE. TABLE OF CONTENTS FEATURES AND TECHNICAL SPECS SAFETY INSTRUCTIONS REMOTE CONTROL FRONT PANEL REAR PANEL CONNECTIONS SYSTEM SETUP FOR DVD MODE REMOTE FUNCTIONS HOW TO SEARCH SYSTEM SETUP TROUBLESHOOTING COMMON OPERATION...
Features: • Two-Way Wooden Speaker Box • Includes Two Wireless Microphone with Blue Display • Built-in FM Radio with USB Line in • Digital Ampli er IC for Strong Sound • Produce Instant Boost Bass and Max Volume Performance • With Bluetooth Function and HDMI Port •...
What’s In The Box: • BT Stereo System • Remote Control • AV Connection Cable • Two Wireless Microphones • Power Cord FCC STATEMENT This equipment has been tested and complies with the limits for a Class B digital device, per part 15 of the FCC Rules.
Page 5
4. Place the unit where there is good ventilation. Place it on a at, hard, and stable surface. 5. Do not place the unit on a bed, sofa, rug, or similar surface as this may block the ventilation openings. 6. Do not expose the unit to direct sunlight or place it in an abnormally hot location.
Remote Control Function Keys Note: Use 2 x 'AAA' batteries (Not included). Keep away from children. 1. Standby/Power on/o switch: Press to open/close the unit power. In this mode, the unit is still consuming a small amount of power. OPEN/CLOSE: Open/Close the disc tray.
Page 7
4. Return: After pressing "Menu" (In 'ON' mode), choose a program then press "Return" to top menu (Only for VCD/SVCD/DVD discs). LANGUAGE: Choose di erent languages in DVD discs (Only supports multi- language discs). OSD: Press OSD on the remote control to display single elapsed time, single remaining time, total elapsed time, total remaining time, and other information about the disc.
Page 8
Enter: Con rm menu selection Menu/PBC: Display the menu. Sets PBC of VCD equipped with Playback Control (PBC) Function to On/O . Top Menu: Displays the top menu 7. FM-/FM+ (REV/FWD) In FM mode: Short press to next/previous channel Press and hold for manual search (Unit will stop at the current scanning channel automatically) In DVD/USB mode: Forward/Backward (x2, x4, x8, x20)
SYSTEM SETUP FOR DVD MODE Setup Follow the steps below to check the connection: 1. Turn ON the TV and shift to “VIDEO INPUT”. 2. Turn ON other units such as an audio system or VCR if they are connected. Turning the Unit ON: 1.
REMOTE FUNCTIONS DISC INSTRUCTION OPERATION Press STOP button to enter Stop mode. The TV screen will display the starter logo. With certain disc types, such as DVD, the player can resume playback from the point STOP/ where it was stopped. Press RESUME to resume playback from the location where playback was stopped or from RESUME FORMATS...
Page 14
REMOTE FUNCTIONS DISC INSTRUCTION OPERATION Continuously press this key to select left channel, right channel, or stereo. You should DVD, rst choose audio output as 2 CH in the setup SVCD, VCD menu. Press “MUTE” to turn o sound and press again MUTE to turn on.
HOW TO SEARCH DISC TV SCREEN OPERATION Press the GO-TO button once to display the Screen Search menu. Press it twice to TITLE: 01/06CH cancel. In the Search Menu, you can use CHAPTER: 001/002 the UP/DOWN cursor buttons to select an item.
SYSTEM SETUP BRIGHTNESS TV SYSTEM Use UP/Down arrows to adjust the Europe: PAL brightness. USA: NTSC BRIGHTNESS TV SYSTEM NTSC CONTRAST AUTO PLAY HD OUTPUT AUTO SATURATION VIDEO SHARPNESS TV TYPE PASSWORD RATING NEXT PAGE DOWNMIX LANGUAGE SETUP If two channels are required, select Select di erent on- Screen Display the stereo option.
TROUBLESHOOTING Before repairing, please take a look at the following problems and possible solutions rst. PROBLEM SOLUTION If you place the disc on the tray and the player displays "No Disc" once loaded: 1. Check whether the disc is placed correctly (label side up).
Selecting a Program to Copy: Move the Direction cursor over the program to be copied. If only part of the program is to be copied, move the cursor over the upper program selection, then press Con rm to cancel the selection. Use the Direction buttons on the remote control to select the program to be copied, then press the Con rm button.
The corresponding screen will then display "BT," indicating that the BT function is on. 2. Ensure the BT function is on on the external device and search for Pyle USA. Once found, click on it and pair. Some devices may need a pin code to connect;...
Page 20
Questions or Comments? We are here to help! Phone: 1.718.535.1800 PyleUSA.com/ContactUs...
Need help?
Do you have a question about the PHSKR22 and is the answer not in the manual?
Questions and answers