Americaloc GL300MXW Quick Start Manual

IMPORTANT:
Your device works in the U.S, Canada, Mexico and in more than 180 countries.
If you have
support@americaloc.com. Our helpful, experienced customer service agents are
here to answer your questions, explain our services, and help you get the most of
your GPS monitoring experience.
Your complete satisfaction is our top priority!
Before using our products or installing a device, carefully read our legal terms which you can
nd at https://americaloc.com/legal/termsOfService.html
Appearance and LED behavior
LED BEHAVIOR:
BLUE:
When you turn the device on,
it will blink for a few minutes
for testing purposes before
going dark to save battery life.
RED:
Fast ash: Charging
Slow ash: Low battery
Dark: Normal behavior or
device OFF
Solid: Charging completed
GREEN:
Fast ash: Searching for network
Slow ash: Registered on network
Dark: Sleep mode or device OFF
Welcome to your Satellite Tracking Experience
any questions or need help,
POWER KEY: On the upper side of the
device
ACTION BUTTON:
for at least 5 seconds or until the unit vibrates, the
device will attempt to send its location data, and the
event will be displayed on the tracking platform as an
"Action Button Pressed. "
please contact
POWER ON: Press the power key for 5
seconds, or until the device vibrates.
Make sure the device is ON before using
it.
POWER OFF: Press the power key for 5
seconds, or until the device vibrates. Wait
for the LEDs to turn o . When there is no
mobile signal, the device may take up to
5 minutes to power down.
When you press and hold the button
us at