Page 1
Technical Support and E-Warranty Certificate www.vevor.com/support KNEE SCOOTER MODEL:HFK-9277KD We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us.
Page 2
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
Page 3
Your safety to operate this product depends upon whether you completely follow the instructions, cautions and warnings in this manual. Vevor Corporation is not liable for any damages and/or injuries resulting from individual unsafe operation or failure to follow the instructions, cautions and warnings in this manual.
Parts Description Hand Grip Loop Lock Steering column Car pockets Star Knob① Knee pad Star Knob② Safety pin Connecting pin Star Knob③ Product parameter Table 1 SPECIFICATIONS Overall size (L*W*H) 930*535*1130 mm Color Black Handle height 925-1135mm Knee pad height 480-605mm - 3 -...
Page 5
wheelbase 580mm-625mm(adjustable) Load capacity ≤350 LB Front wheels ODxW (12"x2.215") Rear wheels ODxW (12"x2.215") Assembly 1. Steering column setup (1) Push the lever to the left and downward at the sametime to disengage the pin and push the steering column upward until it is in the full upright position. (Pic. A) (2) Release the lever to make the safety pinto engage the right hole.
Page 6
3. Adjust the handle height (1) Extend handlebars up to desired height, align holes in tiller. (2) Insert star screw through the steering tiller. (3) Tighten Knob securel Handlebars should be set at wrist level to keep your backstraight. 4. Adjust the knee pad height Insert the knee platform to desired height.Insert star screw and tighten knob securely.
down on both loop locks with palms until you hear a “click ” that will tell you wheels are locked. (3) To Release Wheel Locks — Push up on both loop locks with palms of hand to original position. How to adjust brakes? Tools: Plier or 8mm wrench Use pliers (or 8mm wrench) to screw M6 nuts, adjust in the direction of the wheel, the brake can be adjusted a little loose, away from the direction of the wheel, can...
Move slowly so that you can stop safely using your pushing foot. The hand brake may be used if needed but is primarily designed to maintain a stopped stance. Additional Cautions Do not operate on loose gravel or uneven surfaces. ...
Page 9
Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250,9166 Anaheim Place, Rancho Cucamonga,CA91730 Pooledas Group Ltd Unit 5 Albert Edward House, The Pavilions Preston, United Kingdom SHUNSHUN GmbH Römeräcker 9 Z2021, 76351...
Page 10
Technical Support and E-Warranty Certificate www.vevor.com/support...
Need help?
Do you have a question about the HFK-9277KD and is the answer not in the manual?
Questions and answers
The brakes are not locking when the handles are in the locked position.