Advertisement
Quick Links
Operation Manual
Petrol Tiller
65050–65051
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 65050
Summary of Contents for WilTec 65050
- Page 1 Operation Manual Petrol Tiller 65050–65051 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 There is a risk that stones and other objects could be thrown out by the tiller. This symbol means that the engine speed is low. This symbol means that the engine speed is high. © by WilTec Wildanger Technik GmbH Item 65050–65051 Page 3 http://www.wiltec.de...
- Page 4 • Use only approved parts. Use only identical replacement parts for maintenance and repairs. Contact an authorised service centre for this purpose. © by WilTec Wildanger Technik GmbH Item 65050–65051 Page 4 http://www.wiltec.de 02 2025-1...
- Page 5 • Store the device in a dry, clean place. Fuel or oil may leak during transport. Secure the device accordingly and take precautions to protect the environment from contamination. © by WilTec Wildanger Technik GmbH Item 65050–65051 Page 5 http://www.wiltec.de...
- Page 6 Parts overview № Name № Name Frame Bracket and handle Left handle (Control Lever) Wheel Control lever Right handle (On/Off, Speed) Depth limiter © by WilTec Wildanger Technik GmbH Item 65050–65051 Page 6 http://www.wiltec.de 02 2025-1...
- Page 7 Fig. 2 Fig. 3 Fig. 4 Fig. 5 © by WilTec Wildanger Technik GmbH Item 65050–65051 Page 7 http://www.wiltec.de 02 2025-1...
- Page 8 Fig. 9 Cutting height adjustment Adjust the desired tilling depth by shifting the depth limiter. Three different positions are possible. Fig. 10 Slow Choke Quick Fig. 11 © by WilTec Wildanger Technik GmbH Item 65050–65051 Page 8 http://www.wiltec.de 02 2025-1...
- Page 9 Wipe body with a soft cloth. • For hardened dirt, clean unit with a soft cloth and soapy wa- ter. Every 100 operating hours Check, clean, or replace spark plug. © by WilTec Wildanger Technik GmbH Item 65050–65051 Page 9 http://www.wiltec.de 02 2025-1...
-
Page 10: Troubleshooting
Furrow width (cm) Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 65050–65051 Page 10 http://www.wiltec.de...
Need help?
Do you have a question about the 65050 and is the answer not in the manual?
Questions and answers