LuxenHome WHAP2060 Instruction Manual

Product #:
Product Name:
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the
highest standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or
damaged parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Tree Top（A）
Tree Top（B）
Tree Pot
UL 120V Plug
Before You Start
1. Decide on an appropriate location for your product, please read assembly and Instruction procedure
carefully.
Note: This tree may utilize light sets that are marked for indoor and outdoor use, but the artificial
tree is for indoor display only.
2. Retain the instructions for future use and save the carton for storing your tree.
Assembly and Instruction Procedure (no tools required for assembly):
1. Remove all packaging (i.e., cardboard or plastic) before beginning. We suggest unpacking the tree on
a large cloth. If your tree is snow-flocked, then some of the flocking may come off during unpacking
and fluffing branches.
2. Assemble the Tree: Put the pot base on a flat surface. Carefully insert the bottom of the tree section
(B) into the pot. Make sure the tree pole is firmly inserted into the pot. Insert the top section (A) into
the bottom section (B). Take care not to place unnecessary pressure on the brackets during
assembly.
3. Now that the tree is fully assembled, connect the light plugs as shown in the image below. Attach the
plug to the string lights located in the bottom section of the tree and plug into an electrical outlet. If
lights do not come on, skip to the section for troubleshooting tips.
WHAP2060
3.9Ft Pre-Lit Artificial Pine Tree Potted
Quantity
1
1
1
1
Instruction Manual
Please save this manual for future reference.