LuxenHome WHAP2127 Instruction Manual

Product Name:
Product #:
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards
of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Tree Top (A)
Tree Bottom (B)
Tree Base
Before You Start
1. Decide on an appropriate location for your product, please read assembly and Instruction procedure carefully.
Note: This tree may utilize light sets that are marked for indoor and outdoor use, but the artificial tree is for
indoor display only.
2. Retain the instructions for future use and save the carton for storing your tree.
Assembly and Instruction Procedure (no tools required for assembly):
Remove all packaging (i.e., cardboard or plastic) before beginning. If your artificial tree has snow-flocking, we
suggest unpacking the tree on a large cloth. Some of the flocking may come off during unpacking and fluffing of
branches.
1. Assemble the Tree:
Carefully insert the bottom of the tree section (B) into the pot. Make sure the tree pole is firmly inserted inside
the pot.
Insert section (A) into section (B).
Now that the tree is fully assembled, connect the light plugs as shown in the image below. Plug into an
electrical outlet. If lights do not come on, skip to the section for troubleshooting tips.
Pre-Lit Potted Artificial Christmas Tree
WHAP2127
Quantity
1
1
1
Instruction Manual
Please save this manual for future reference.