Page 1
Installation Instructions MINI SAUNA (FOOT SPA) WOODBRIDGE Model:FS100 READ ALL INSTRUCTIONS BEFORE UNPACKING THE PRODUCT INSTRUCTIONS THAT, IF IGNORED COULD RESULT IN DEATH OR SERIOUS INJURY CAUSED BY INCORRECT HANDLING OR INSTALLATION OF THE PRODUCT. THESE INSTRUCTIONS MUST BE OBSERVED FOR SAFE INSTALLATION.
WOODBRIDGE Specification and Model Model FS100 Size 19-5/8ʺ×15-3/4ʺ×28-3/8ʺ Power 340W Power Supply 120V 60Hz Timing range 1-60min Temperature 25°C-65°C (77°F-149°F) Net weight 15KG (33Ibs) Work Environment 1. Temperature: -5°C to 40°C (23°F to 104°F) 2. Humidity: ≤85% 3. Pressure: 70-106Kpa 4.
Page 5
WOODBRIDGE User Guidelines and Operation Instruction Important Notes 1. Check that the circuit and socket meet the equipment's load and voltage requirements. 2. Set the temperature and time for the biological spectrum foot bath bucket based on individual circumstances and environmental conditions.
WOODBRIDGE Transportation and Storage 1. Transportation: The product should be prevented from rain, splashes, and strong impacts. It should not be transported with corrosive materials and must comply with national transportation regulations. 2. Storage: Store the product in a well-ventilated, dry area and free from corrosive substances.
WARRANTY Woodbridge warrants its products as listed in below to be free of material and workmanship defect, subjected to the limitations set forth in this limited warranty. RESPONSIBILITIES OF OTHERS DISCLAIMER www.woodbridgebath.com...
Page 8
IMPORTANT! DO NOT USE: Abrasive cleaners such as: acid, ammonia, bleach, and similar solutions. Use of such solutions may cause corrosion, finish peeling, and/or dull the surface. DO NOT USE: Abrasive sponges or cloth. Never use steel, wool, or wired brushes that will permanently scratch the Please don't hesitate to contact us if you have any questions or concerns.
Need help?
Do you have a question about the FS100 and is the answer not in the manual?
Questions and answers