Advertisement
Quick Links
Advertisement
Related Manuals for Halo BOLT ULTIMATE 3.0
Summary of Contents for Halo BOLT ULTIMATE 3.0
- Page 1 USER MANUAL FOR BOLT ULTIMATE 3.0 ®...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS PRODUCT MAINTENANCE FOR ALL QUESTIONS RELATED TO SAFETY, WARRANTY OR EXCHANGE REQUESTS, PLEASE CONTACT US. 1-800-255-6061 IF THE JUMP STARTER OVERHEATS, BECOMES SWOLLEN, OR IS DEFORMED IN ANY WAY, IMMEDIATELY STOP USING THE PRODUCT AND CONTACT CUSTOMER SERVICE. YOUR SAFETY IS IMPORTANT TO US. -
Page 3: Product Overview
PRODUCT OVERVIEW DIGITAL DISPLAY 1. BATTERY FUEL GAUGE INDICATORS Each bar presents 20% of the charge capacity. 2. BATTERY PERCENTAGE Displays the current battery level. 3. UNIT IS CHARGING When on, this indicates the unit is plugged in and charging. 4. -
Page 4: Jump Start Your Vehicle
CHARGE YOUR BOLT ULTIMATE 3.0 JUMP START YOUR VEHICLE Fully charge the jump starter before using. To charge, connect the jump IMPORTANT: Before connecting the jumper cables, ensure there starter to the included USB-C cable. The unit can be recharged from is no obvious corrosion or dirt on the battery terminals. - Page 5 JUMP START YOUR VEHICLE HOW TO USE THE FLOODLIGHT STEP 3: TURN IT ON The multi-mode floodlight cycles through the following stages each Press the "Jump Start" button to begin the safety check. The green time the button is pressed: light should flash for 3 seconds then turn solid.
-
Page 6: Air Compressor
NOTE: Always check and follow the manufacturer's recommended pressure. Use caution as the air hose and connectors may get hot after extended use. The Bolt Ultimate 3.0 compressor is designed to automatically stop after an extended run-time or if an over-temperature... - Page 7 Press the AC Power ON/OFF Button and wait for a solid green light. NOTE: Make sure the AC power plug is fully plugged into the AC port before pressing the AC Power ON/OFF Button. NOTE: The Bolt Ultimate 3.0 charger will automatically power off after 30 minutes of inactivity.
-
Page 8: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING FOR ALL QUESTIONS RELATED TO SAFETY, WARRANTY ISSUE POTENTIAL CAUSE SOLUTION OR EXCHANGE REQUESTS, PLEASE CONTACT US. 1-800-255-6061 Jump Start button flashes The jump starter is waiting Check the jumper cables and green continuously. to be connected to a ensure they are properly battery or a connected to the battery. -
Page 9: Product Registration
Dimensions 6.5 x 3.8 x 1.7 in. (263.5 x 133 x 55mm) ACTIVATE YOUR WARRANTY TODAY Your HALO jump starter has a 90 day warranty from the date of purchase. Weight 1.1 lb. (490g) By registering your warranty, you will help protect your investment and... -
Page 10: Fcc Note
FCC NOTE TRANSPORTING DANGEROUS GOODS COMPLIANCE WITH FCC REGULATION NOTE: Any changes or modifications of this device could void the This device complies with part 15 of the FCC Rules and RSS-Gen of IC warranty. Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must Fully charge before using Do not disassemble... - Page 11 WWW.HALOPOWER.COM...
Need help?
Do you have a question about the BOLT ULTIMATE 3.0 and is the answer not in the manual?
Questions and answers