Nacon REVOLUTION X UNLIMITED Start Manual page 5

FAST CHARGING (AROUND 3H):
Connect your controller directly to your Xbox or PC with the USB cable supplied.
The controller automatically starts charging and the status displays on the controller's
screen.
When you power on the controller, the controller's screen displays the battery level next
to the battery icon.
I DO A FULL RESET OF THE CONTROLLER
If you need to do a full reset use a paper clip to activate the button
inside the reset hole located on the rear of the controller.
I USE THE REVOLUTION X UNLIMITED APPLICATION
With the Nacon Revolution X Unlimited application, you can do a deep customization of
your controller. The application is available on Xbox and PC on the Microsoft store, free
of charge.
1. In the Microsoft store search bar, type "Revolution X Unlimited".
2. Download the application.
NOTE: Make sure not to download the application "Revolution-X",
this is not compatible with this controller.
3. Connect the controller to your PC.
4. Set the controller to the modes that follow:
• Wired mode.
• Xbox mode.
• Advanced mode.
5. Launch the application.
6. Follow the instructions on screen to personalize your profile.
EN /