1. Manuals
  2. Brands
  3. Voxx Manuals
  4. Remote Control
  5. AVITAL D9757L
  6. Owner's manual

Voxx AVITAL D9757L Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model D9757L
Owner's Guide
This product is intended for installation by a
professional installer only! Attempts to install this
product by a person other than a trained professional
may result in severe damage to a vehicle's electrical
system and components.
DIRECTED by VOXX LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824
(10/24)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVITAL D9757L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Voxx AVITAL D9757L

Summary of Contents for Voxx AVITAL D9757L

  • Page 1 Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s electrical system and components. DIRECTED by VOXX LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 (10/24)
  • Page 2 Congratulations Congratulations on the purchase of your AVITAL® system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For additional information please contact your Authorized Dealer or visit www.avital.com. After installation is completed, you should receive: •...
  • Page 3 Important Information Safety Information Warning! Failure to heed the information in this guide can result in death, personal injury or property damage, and may also result in the illegal use of the system beyond its intended purpose. Your Warranty Your system comes with a warranty. The warranty terms are detailed at the end of this guide.
  • Page 4 2-Way Remote Control Feature Description Used for transmitting and receiving Internal Antenna information. Provides visual command confirmations, LCD Display system status, programming menus, and system information. Used to access function levels for Function (f ) commands, configuration menus for programming, car selection, and to button request reports.
  • Page 5 1-Way Remote Control Feature Description Internal Antenna Used for transmitting information. Transmit LED Active when transmitting information. Command buttons Used to perform locking, unlocking, arming and disarming, remote starting, auxiliary channel and panic activation. Used to access function levels for Function (f ) commands, configuration menus for programming, car selection, and to...

  • Page 6: Control Center

    Control Center Control Button The Control Center, typically located on the upper part of the front windshield. It consists of: • The In-vehicle system antenna, used for system and remote control communication. • The Status LED, as a visual indicator of the system’s status.

  • Page 7: Remote Control Command Table

    Remote Control Command Table Level Basic Com mands LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 Button Sensor Full Silent Silent Arm/ Sensor Silent Arm/Lock (Panic) Mode Lock Bypass Mode Silent Alarm/ Start Disarm/Unlock Disarm/ System Car Finder Valet Unlock Valet Runtime Timer...

  • Page 8: Status Screen Icons

    Status Screen Icons Status Icons Text Field The table below describes all the status screen icons. Icon Description Armed/Locked: The doors are locked, and the included alarm features are enabled. Armed/Locked in Alarm Valet: The doors are locked, and the included alarm features are disabled. Disarmed/Unlocked: The doors are unlocked, and the included alarm features are disabled.
  • Page 9 Icon Description Remote start is active, the engine is running. Timer Start is ON; Remote Start is ON. Note: When the icon is without an arrow head: Timer Start is enabled: Remote Start is OFF. Start Valet is on - the Remote Start features are disabled. Smart Start is ON;...
  • Page 10 Icon Description ON during the Door Zone Full Trigger output. ON during Fault Report to indicate a Door is open when the system is armed/locked. ON during a Hood Zone Full Trigger output. ON during Fault Report to indicate the Hood is open when the system is armed/locked.

  • Page 11: Using Your System

    Icon Description The remote will emit Beeps and Tones when messages are received. Text Displays the Clock, Runtime, Temperature, message text field and feature menus. * This icon is not present until the Car 2 is turned on in the Setup Remote configuration menu.

  • Page 12: Fault Condition Alerts

    Performing Basic Commands (*All Systems) • Perform Basic Commands by pressing a Command button. Performing Advanced Commands (*DS3/DS4 Only) • Perform Advanced Commands by first accessing Levels 1-4 using the FUNCTION button and then by pressing a Command button while within a Level. Advanced command example: To send a ‘Silent Arm’...

  • Page 13: Basic Commands (Direct Access)

    Basic Commands (Direct Access) Arm / Lock Press and release LOCK. The doors lock. The system is armed if applicable. Disarm / Unlock Press and release UNLOCK. The doors unlock. The system is disarmed if applicable. Remote Start Press and release REMOTE START. Activates (or if ON, deactivates) the remote starter.

  • Page 14: Advanced Commands: (Level 1)

    Advanced Commands: (Level 1) Press and release the FUNCTION button (1) time before pressing one of the following command buttons. LEVEL 1 is displayed. Silent Arm Press and release LOCK. Used to temporarily disable Arm chirps. Silent Disarm Press and release UNLOCK. Used to temporarily disable Disarm chirps.

  • Page 15: Advanced Commands: (Level 2)

    Advanced Commands: (Level 2) Press and release the FUNCTION button (2) times before pressing one of the following command buttons. LEVEL 2 is displayed. Sensor Bypass Press and release LOCK. Performing the Sensor Bypass command will incrementally bypass sensor operations and be confirmed as follows: Warn Away Bypass: The parking lights flash two times.

  • Page 16: Advanced Commands: (Level 3)

    Timer Start Press and release REMOTE START. Activates (or if ON, deactivates) Timer Start.. The parking lights flash quickly four times for ON and slowly four times for OFF. ON or OFF text displays and beeps play (one for on, two for off) to confirm.

  • Page 17: Advanced Commands: (Level 4)

    Car Finder Press and release UNLOCK. The siren emits one long chirp and the parking lights flash for 10 seconds. The parking light flashes stop if armed or disarmed while Car Finder is in progress. ‘Smart’ Start (Feature) Press and release REMOTE START. Activates (or if ON, deactivates) the ‘Smart’...

  • Page 18: Remote Control Configuration

    Garage Mode (Remote Start Valet) Press and release UNLOCK. Enter/Exit Garage Mode. The parking lights flash 9 times quickly entering and 9 times slowly exiting. Defogger Press and release REMOTE START. Activates the vehicle Defogger circuit (if connected) while Remote Start is activated and the parking lights flash three times.

  • Page 19: Navigating Menus And Options

    2-Way LCD Remote Setup Navigating Menus and Options Navigating menus and features, changing options, and exiting are performed using the remote control buttons. The following instructions discuss how to access and configure the settings. Button Operation • To access menus, set options, and to perform actions that are displayed in the text field, use the FUNCTION button.
  • Page 20 MAIN MENU The Main Menu list of features is available for configuration of the remote control. Keypad Lock Options: OFF, AUTO (ON) When OFF, the buttons do not lock and always perform a command when pressed. When set to AUTO (ON), the remote buttons lock after a 20 second lapse between buttons presses to prevent unintentional operations.

  • Page 21: Page Mode

    Page Mode Options: POWER SAVE, OFF Paging is how the 2-Way remote monitors your system’s messages. POWER SAVE extends battery life by turning Paging OFF after one week if the remote control is not used during this period. Just press any button to resume system monitoring.
  • Page 22 Car 2 Options: OFF, ON, HOME* This remote can control two systems independently. When set to OFF, the Car 2 select option is not available. When set to ON, the remote can be set to control two systems. *The HOME option is not used in this configuration. Screen Color Options: OFF, WHITE, CYAN, MAGENTA, BLUE, YELLOW, GREEN, RED.

  • Page 23: Remote Features

    Review Displays firmware version. Exit Exits and returns to the main menu. 1-Way Companion Remote Setup Remote Features To Enter Programming: Press and hold the FUNCTION button for eight seconds until the transmit LED turns on, then release the button. Within 30 seconds press and hold the UNLOCK button for two seconds until the transmit LED flashes then comes on solid, then release the UNLOCK button.

  • Page 24: Keypad Lock

    Note: The remote control automatically exits the configuration mode if no buttons are pressed within 30 seconds. Keypad Lock (Quick Toggle) In addition to turning ‘Keypad Lock’ ON/OFF in the ‘Remote Control Configuration’ menu, you can also do so using the “Quick Toggle” method without needing to enter the menu.

  • Page 25: Sensor Adjust

    Car 2 Options: OFF, ON OFF: The Car Select feature is not available. When set to ON the Car Select feature is enabled. See “Car Select” section of this guide for details on using a remote with two systems. ON: The remote control can operate two systems independently. Sensor Adjust To avoid unintended alarm triggers;...

  • Page 26: Sensor Warn Away

    This three second delay allows time to disarm and silence the siren in case of accidental trigger. The Full Trigger message is still sent to the remote. Sensor Silent Arm Sensor Warn Away and Sensor Full Trigger activations only send messages to the remote, while the parking light flash and siren outputs are disabled.

  • Page 27: Trigger Zone Fault Report

    Note: As a precaution, if programmed for ‘Passive Arming’ or ‘Auto Re-Arming’ the system should be placed into Valet Mode until a remote is available. Trigger Zone Fault Report When armed by remote command the system runs a status check of the alarm trigger zones.

  • Page 28: Passive Arming

    NPC (Nuisance Prevention Circuitry NPC monitors all alarm zones. If any zones are triggered excessively, NPC bypasses them until corrected. If a point of entry (trunk, hood, door) is left open following a forced entry, it is bypassed. It becomes active again only after being closed. Note: Bypassed sensors automatically reset after one hour and after the Ignition is cycled.

  • Page 29: Remote Start Features

    Remote Valet (Alarm Valet) Valet mode can be entered and exited by performing the Remote Valet command or manually using the vehicle key and the control button. When entered, the alarm functions are disabled while the convenience features still operate normally. Arm and Disarm commands lock and unlock the doors.

  • Page 30: Advanced Start

    Garage Mode (Remote Start Valet) (DS3/DS4 Systems) Disabling the Remote Start System/Garage Mode Garage Mode is a safety feature that disables the remote start system if the vehicle is parked in a garage, being serviced, or used by someone unfamiliar with remote start systems. When Garage Mode is ON, any attempt to start the engine, activate Timer Mode, or enter Pit Stop mode is denied and remote start diagnostics flashes the parking lights nine times.
  • Page 31 Precautions for the Advanced Start features: • Park the vehicle in a well-ventilated area away from windows and doors that lead into inhabited spaces. • Arm/Lock the vehicle, the engine will not start unless the doors are locked. Only one Advanced start feature can be enabled at any given time. For manual transmission vehicles MTS mode must be enabled before Timer Start or Smart Start can be activated.

  • Page 32: Temperature Reporting

    Temperature Reporting During remote start the vehicle interior is checked regularly for temperature changes. If a change in temperature is detected this report will be sent to the remote for display. Each time the remote receives this report it will beep and display the temperature as described for the ‘Temperature Request’...
  • Page 33 MTS Mode (Manual Transmission Start) When installed into a manual transmission vehicle, the system requires that the MTS Mode is properly set when parking. If MTS Mode is not properly set, or is disabled after being properly set, the system will not start the vehicle. To set MTS: With the engine running, place gear shifter in neutral position.

  • Page 34: System Features

    The parking lights turn on and the remote start activates. Turn the ignition OFF (engine remains running). Exit the vehicle and close all the doors. Arm the system. The engine runs for the duration of Turbo Mode runtime. Note: For Turbo Timer Mode on manual transmission vehicles follow the directions in the MTS Mode (Manual Transmission Start) section with the door open in step 3, press the optional dash mounted activation button or send the Timer Mode command from...

  • Page 35: Feature Not Available

    System Status Updates The system sends a message to the 2-Way remote control after any major action has occurred. When the remote receives this message, it updates the Remote/System status. Out of Range Each time a command is performed the 2-Way remote will expect a command confirmation from the system.

  • Page 36: Car Select

    Car Select Car 2 remote control option must first be turned ON. Press and hold the FUNCTION button for three seconds. The remote flashes the LED and beeps once or twice to indicate the selected vehicle is Car 1 or Car 2. Note: Continuing to hold will leave car selection and enter the remote menu.
  • Page 37 Driver Door Priority Unlocking* The door unlocking operation can be configured to emulate an OEM style of driver priority unlocking for added security during disarming. *Note: These features are not compatible with all vehicles. Additional parts and labor may be required and will vary by vehicle and installation.
  • Page 38 Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an Authorized Dealer. If you have any questions, ask your Authorized Dealer or contact Customer Service at 1-800-753-0600.
  • Page 39 PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED by VOXX LLC WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
  • Page 40 This product is designed for fuel injected vehicles only. Use of this product in a Manual Transmission vehicle must be in strict accordance with this guide. This product should not be installed in any convertible vehicles (soft or hard top), with a manual transmission.

  • Page 41: Battery Information

    Battery Information When the remote control battery begins to weaken, the operating range will be reduced. Battery Replacement: If communication range is diminished, or the remote control ceases to function, the remote battery should be replaced. It is recommended to have your battery replaced by an Authorized Dealer.

  • Page 42: Patent Information

    Patent Information This product may be covered by one or more of the patents found on our website. For a full list of patents, please visit: www.voxxintl.com/company/patents Government Regulations FCC Compliance This device complies with Part 15 of the FCC rules and with RSS- 210 of Industry Canada.

  • Page 43: Warranty Information

    Warranty Information LIMITED LIFETIME WARRANTY DIRECTED by VOXX LLC (the Company) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within the Lifetime from the date of...
  • Page 44 This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. DIRECTED by VOXX LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824...

This manual is also suitable for:

7757l7657l

Table of Contents