Voxx Pursuit PR5BZ Owner's Manual
  1. Manuals
  2. Brands
  3. Voxx Manuals
  4. Remote Control
  5. Pursuit PR5BZ
  6. Owner's manual

Voxx Pursuit PR5BZ Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Owner's Guide
For Models:
PR5BZ
PROSECRS
RF Upgrade Kit
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR
SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information.
2019 Voxx Electronics Corporation. All rights reserved.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Pursuit PR5BZ and is the answer not in the manual?

Questions and answers

Related Manuals for Voxx Pursuit PR5BZ

Summary of Contents for Voxx Pursuit PR5BZ

  • Page 1 IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply. Please see your installing dealer for more information. 2019 Voxx Electronics Corporation. All rights reserved.

  • Page 2: Table Of Contents

    Table of Contents Using Your Remote Control ..............3 Arming the Security System .............. 3 Disarming the Security System ............3 Two Stage Door Unlock (optional) ............. 3 Activating Trunk Release (optional) ........... 3 Activating AUX Output (optional) ............3 Using the Personal Protection Alarm ..........

  • Page 3: Using Your Remote Control

    3 seconds. The system will automatically stop after 30 seconds. *Throughout this manual, ‘press’ refers to pressing for less than 1 second; ‘press and hold’ refers to pressing for more than 3 seconds. 2019 Voxx Electronics Corporation. All rights reserved.

  • Page 4: Bypassing The Shock Sensor

    Bypassing The Shock Sensor The included security shock sensor has two stages of detection, Warn-Away and Full Trigger. To arm the system and shock sensor press the button. The system will beep and the lights will flash 1 time. To Arm the system and bypass the Warn-Away detection stage press the button 2 times within 5 seconds.

  • Page 5: Valet Mode

    Within 10 seconds, press and release the Brake pedal 3 times. The alarm system will stop sounding and enter the (by-passed) mode. You can now start and operate the vehicle normally. This feature must be programmed ON by an authorized dealer. 2019 Voxx Electronics Corporation. All rights reserved.
  • Page 6 Custom Code Valet Override (Optional) Unlike the default Valet Override, Custom Code Override is a user personalized code that offers a higher lever of security. If the user chooses to use Custom Code Override, Feature Bank 2 ; Feature 9 must be programmed for “Custom Code”. Once the option has been selected the code must be programmed.

  • Page 7: Using Your Remote Vehicle Starter

    The engine is over-revved (tach checking only). Valet Mode is active. Refer to the Valet Mode section of this manual on page 5. Remote Start Ready Mode is not set. Manual transmission vehicle’s only. 2019 Voxx Electronics Corporation. All rights reserved.

  • Page 8: Remote Start Ready Mode

    Remote Start Ready Mode must be enabled if your vehicle is equipped with a manual transmission. Remote Start Ready Mode - Manual Transmission Vehicles Only To activate the remote start function, the system must first be in Remote Start Ready Mode.

  • Page 9: Cancelling Remote Start Ready Mode

    The unit enters Quick Stop Mode and will remain running until remote start time-out and then shut down. (Remote Start Ready Mode is NOT active) Note: Do not leave children or animals unattended in the vehicle when using the quick-stop feature. 2019 Voxx Electronics Corporation. All rights reserved.

  • Page 10: Turbo Timer Mode (Optional)

    Operating the 2 / 4 Hour Start Up Timer Mode The system has the ability to start the vehicle every 2 or 4 hours for a 48 hour period. This feature is especially useful in cold climates where the only means to keep the engine and engine fluids warm is to periodically start the engine.
  • Page 11 Turn the ignition key OFF, the vehicle will continue to run until the pre- programmed time has elapsed (1, 3, or 5 minutes) To disengage the turbo timer feature, press the vehicle’s brake pedal. 2019 Voxx Electronics Corporation. All rights reserved.

  • Page 12: Status Led, Light Flashes And Siren/Horn Indications

    Status LED, Light Flashes, and Siren/Horn Indications Status LED Flash Indications LED Flashes Function Disarmed Slow Flash Armed Fast Flash Passive Arming Countdown ON (Solid) Valet Mode 1 Flash / Disarmed Zone 1 Trigger, Shock Sensor 2 Flashes / Disarmed Zone 2 Trigger, Trunk / Hood 3 Flashes / Disarmed Zone 3 Trigger, Door...

  • Page 13: Replacing Remote Control Batteries

    2. Remove the old battery, observing the +/- symbols on the batteries and replace with a new battery. 3. Reassemble the halves of the remote control 4. Test operation of the remote control. 2019 Voxx Electronics Corporation. All rights reserved.

  • Page 14: Warranty Information

    Notes PROSECRS PR5BZ Owners REV B...
  • Page 15 LIMITED LIFETIME WARRANTY Applies to Pursuit Series Control Modules, Sirens, Sensors, and Relays. Voxx Electronics Corporation (the Company) warrants to the original purchaser of this product that should this product or any part thereof, (other than transmitters) under nor- mal use and conditions, be proven defective in material or workmanship during the life-...
  • Page 16 Voxx Electronics Corporation. Customer Service 1-800-225-6074 WWW.VOXXELECTRONICS.COM FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.

Table of Contents