1. Manuals
  2. Brands
  3. Voxx Manuals
  4. Remote Control
  5. Avital D9858L
  6. Owner's manual

Voxx Avital D9858L Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Model D9858L
Owner's Guide
This product is intended for installation by a
professional installer only! Attempts to install this
product by a person other than a trained
professional may result in severe damage to a
vehicle's electrical system and components.
DIRECTED by VOXX LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824
(10/24)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Avital D9858L and is the answer not in the manual?

Questions and answers

Related Manuals for Voxx Avital D9858L

Summary of Contents for Voxx Avital D9858L

  • Page 1 Attempts to install this product by a person other than a trained professional may result in severe damage to a vehicle’s electrical system and components. DIRECTED by VOXX LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824 (10/24)
  • Page 2 Congratulations Congratulations on the purchase of your AVITAL® system. Reading this Owner’s Guide prior to using your system will help maximize the use of your system and its many features. For additional information please contact your Authorized Dealer or visit www.avital.com. After installation is completed, you should receive: •...
  • Page 3 Important Information Safety Information Warning! Failure to heed the information in this guide can result in death, personal injury or property damage, and may also result in the illegal use of the system beyond its intended purpose. Your Warranty Your system comes with a warranty. The warranty terms are detailed at the end of this guide.
  • Page 4 2-Way Remote Control Feature Description Used for transmitting and receiving Internal Antenna information. Each button has an associated LED next Confirmations LED’s to it that is active during related operations. Used to access function levels for Function (f ) commands, configuration menus for programming, car selection, and to button request reports.
  • Page 5 1-Way Remote Control Feature Description Internal Antenna Used for transmitting information. Transmit LED Active when transmitting information. Command buttons Used to perform locking, unlocking, arming and disarming, remote starting, auxiliary channel and panic activation. Used to access function levels for Function (f ) commands, configuration menus for programming, car selection, and to...

  • Page 6: Control Center

    Control Center Control Button The Control Center, typically located on the upper part of the front windshield. It consists of: • The In-vehicle system antenna, used for system and remote control communication. • The Status LED, as a visual indicator of the system’s status.

  • Page 7: Remote Control Command Table

    Remote Control Command Table Level Basic Com mands LEVEL 1 LEVEL 2 LEVEL 3 LEVEL 4 Button Sensor Full Silent Silent Arm/ Sensor Silent Arm/Lock (Panic) Mode Lock Bypass Mode Silent Alarm/ Start Disarm/Unlock Disarm/ System Car Finder Valet Unlock Valet Runtime Timer...

  • Page 8: Using Your System

    Using your System Commands and Confirmations Commands, Basic or Advanced, are used to activate system features and are performed by pressing one of the Command buttons. Basic commands control the most often used security and remote start features while Advanced commands control more specialized features and request reports.

  • Page 9: Fault Condition Alerts

    Advanced command example: To send a ‘Silent Arm’ command: Press the FUNCTION button once to access Function Level 1. Press the LOCK button to perform the Silent Arm command. The Arm LED illuminates to confirm when the Silent Arm message from the system is received.

  • Page 10: Basic Commands (Direct Access)

    Basic Commands (Direct Access) Arm / Lock Press and release LOCK. The doors lock. The system is armed if applicable. Disarm / Unlock Press and release UNLOCK. The doors unlock. The system is disarmed if applicable. Remote Start Press and release REMOTE START. Activates (or if ON, deactivates) the remote starter.

  • Page 11: Advanced Commands: (Level 1)

    Advanced Commands: (Level 1) Press and release the FUNCTION button (1) time before pressing one of the following command buttons. Silent Arm Press and release LOCK. Used to temporarily disable Arm chirps. Silent Disarm Press and release UNLOCK. Used to temporarily disable Disarm chirps. Runtime Reset Press and release REMOTE START.

  • Page 12: Advanced Commands: (Level 2)

    Temperature LED count indicated Below 31°F 32°F – 56°F 57°F – 81°F Above 82°F Advanced Commands: (Level 2) Press and release the FUNCTION button (2) times before pressing one of the following command buttons. Sensor Bypass Press and release LOCK. Performing the Sensor Bypass command will incrementally bypass sensor operations and be confirmed as follows: Warn Away Bypass: The parking lights flash two times.

  • Page 13: Timer Start

    Remote Valet (Alarm Valet) Press and release UNLOCK. Enter/Exit Valet Mode. The Control Center LED turns on and off accordingly. Note: The Disarm LED and Valet beeps play (one for ON, two for OFF) to confirm. Timer Start Press and release REMOTE START. Activates (or if ON, deactivates) Timer Start.

  • Page 14: Advanced Commands: (Level 3)

    Advanced Commands: (Level 3) Press and release the FUNCTION button (3) times first, before pressing one of the following command buttons. Sensor Silent Arm Press and release LOCK. The alarm arms, doors lock, and the siren chirps and parking lights flash three times. Car Finder Press and release UNLOCK.

  • Page 15: Advanced Commands: (Level 4)

    Note: Remote Start must be ON to use this feature. LED count % Time Remaining Below 25% 25% - 50% 50% – 75% Above 75% Advanced Commands: (Level 4) Press and release the FUNCTION button (4) times first, before pressing one of the following command buttons. Full Silent Arm Press and release LOCK.

  • Page 16: Remote Control Configuration

    AUX 4 Press and release TRUNK. Activates (or if ON, deactivates) the AUX 4 output. Advanced Commands: (Direct Access) Combo Valet (Alarm & Remote Start Valet) Press and release LOCK and TRUNK simultaneously. Enter/Exit Combo Valet. This enables/disables both ‘Alarm Valet’ and ‘Garage Mode’...
  • Page 17 The remote is now ready for configuration. Press the buttons indicated in the tables below to set the desired feature options. To save the changes once the remote has been configured press the FUNCTION button once, and then press and hold again, the transmit LED will shut off to confirm exiting.

  • Page 18: Keypad Lock

    1-Way Companion Remote Control The 1-Way remote will use the transmit LED to indicate the setting (* indicates default setting). Feature Button LED ON LED OFF Keypad Lock LOCK OFF* Remote Beeps UNLOCK Car 2 REMOTE START OFF* Note: The remote control automatically exits the configuration mode if no buttons are pressed within 30-seconds.

  • Page 19: Page Mode

    Using Your Remote Control with Keypad Lock ON: To temporarily unlock the buttons, press and release the LOCK and UNLOCK buttons simultaneously. The remote plays tones to confirm unlocking. Once unlocked commands can be sent until the Keypad re-locks. To re-lock the keypad before the 20-second timeout duration, press and release the LOCK and UNLOCK buttons simultaneously again.

  • Page 20: Remote Beep

    Car 2 Options: OFF, ON OFF: The Car Select feature is not available. When set to ON the Car Select feature is enabled. See “Car Select” section of this guide for details on using a remote with two systems. ON: The remote control can operate two systems independently. Remote Beep Options: ON, OFF, Triggers Only ON: The 2-Way Remote emits a beep as confirmation of button...

  • Page 21: Sensor Warn Away

    Minor impacts causes the system to emit a Warn Away output by chirping the siren and flashing the parking lights for three seconds. Major impacts caused for example by a forcible entry attempt, results in a Full Trigger output. The siren sounds and the parking lights flash for 30 seconds or longer.

  • Page 22: Emergency Override

    2-Way remote control. The confirmation LED’s flash and siren tones play for 30-seconds. Emergency Override The following procedure disarms the system when a programmed remote is not available. Number of presses Turn the ignition ON. Press the Control Center button the correct number of times (the default is one press).

  • Page 23: Passive Arming

    Table of Zones Zone # (led flashes) Zone Name Trunk Shock Sensor Door Sensor 2 / Instant trigger / Tilt Ignition Hood Other Sensor (DS4 Only) NPC (Nuisance Prevention Circuitry NPC monitors all alarm zones. If any zones are triggered excessively, NPC bypasses them until corrected.

  • Page 24: Auto Re-Arming

    Auto Re-arming* Auto re-arm ensures the vehicle stays protected if it is not entered after disarming by remote control. After disarming by remote, the alarm automatically re-arms itself (and locks the doors if programmed on) in 30 seconds. Open any point of entry to stop the re-arm until the next disarm by remote.

  • Page 25: Remote Start Features

    Remote Start Features (Supported Systems) Key Takeover While remote started, ‘Key Takeover’ must be completed to keep the engine running while the vehicle transitions from Remote start to normal Key operation. To perform Key Takeover: Disarm the system and enter the vehicle (Do not step on the foot brake).

  • Page 26: Advanced Start

    Turn Garage Mode ON or OFF: Turn the ignition ON then OFF. Within 10 seconds, press and release the Control Center button once. The Control Center LED turns on. The parking lights flash: • Nine times quickly when turning on. •...

  • Page 27: Temperature Reporting

    Timer Start Operation Activation begins a countdown timer as set by the installer (default three hours). When the timer expires the engine starts and the Remote Start ON message is sent to the remote control. When the Remote start runtime expires the engine shuts off, the Remote Start OFF message is sent to the remote control and the countdown timer restarts.

  • Page 28: Remote Start Time-Out Alert

    Note: Temperature report must be turned on by an Authorized Dealer. Remote Start Time-out Alert While the Remote Start is ON, a message is sent three minutes before and again at one minute before the engine turns off. The Function LED and Remote Start LED flash and several tones play as an alert to reset the runtime if desired.

  • Page 29: Turbo Timer Mode

    To set MTS: With the engine running, place gear shifter in neutral position. Press and hold the foot brake (do not release). Set the parking brake and leave the engine running. Release the foot brake. Within 20-seconds of foot brake release, press any command button on the remote (after 20 seconds return to Step 2).

  • Page 30: Remote Start Faults

    Turn the ignition OFF (engine remains running). Exit the vehicle and close all the doors. Arm the system. The engine runs for the duration of Turbo Mode runtime. Note: Turbo Timer and Turbo Timer runtime must be configured by an Authorized Dealer. Note: For Turbo Timer Mode on manual transmission vehicles follow the directions in the MTS Mode (Manual Transmission Start) section with the door open in step 3, press the optional...

  • Page 31: Rapid Resume

    Rapid Resume If power is ever disconnected by a mechanic or thief, the system will resume the state it was in at the time of disconnection, when power is reconnected. System Status Updates The system sends a message to the 2-Way remote control after any major action has occurred.

  • Page 32: Car Select

    Car Select Car 2 remote control option must first be turned ON. Press and hold the FUNCTION button for three seconds. The remote flashes the LED and beeps once or twice to indicate the selected vehicle is Car 1 or Car 2. Note: Continuing to hold will leave car selection and enter the remote menu.
  • Page 33 Driver Door Priority Unlocking* The door unlocking operation can be configured to emulate an OEM style of driver priority unlocking for added security during disarming. *Note: These features are not compatible with all vehicles. Additional parts and labor may be required and will vary by vehicle and installation.
  • Page 34 Warning! Safety First Please read the safety warnings below before proceeding. Improper use of the product may be dangerous or illegal. Installation Due to the complexity of this system, installation of this product must only be performed by an Authorized Dealer. If you have any questions, ask your Authorized Dealer or contact Customer Service at 1-800-753-0600.
  • Page 35 PERSONAL INJURY. YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE. DIRECTED by VOXX LLC WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
  • Page 36 This product is designed for fuel injected vehicles only. Use of this product in a Manual Transmission vehicle must be in strict accordance with this guide. This product should not be installed in any convertible vehicles (soft or hard top), with a manual transmission.

  • Page 37: Battery Information

    Battery Information When the remote control battery begins to weaken, the operating range will be reduced. Battery Replacement: If communication range is diminished, or the remote control ceases to function, the remote battery should be replaced. It is recommended to have your battery replaced by an Authorized Dealer.

  • Page 38: Patent Information

    Patent Information This product may be covered by one or more of the patents found on our website. For a full list of patents, please visit: www.voxxintl.com/company/patents Government Regulations FCC Compliance This device complies with Part 15 of the FCC rules and with RSS- 210 of Industry Canada.

  • Page 39: Warranty Information

    Warranty Information LIMITED LIFETIME WARRANTY DIRECTED by VOXX LLC (the Company) warrants to the original purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within the...
  • Page 40 This Warranty gives you specific legal rights and you may also have other rights which vary from state to state. DIRECTED by VOXX LLC, 2351 J. Lawson Blvd., Orlando, Florida 32824...

This manual is also suitable for:

7858l7657l

Table of Contents